ItalianoShop
Showing 121–150 of 1386 results
-
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX TBS1072C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
DatasheetSKU: n/a -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX 2430
The 2430 is a 150 MHz, 2 channel digital oscilloscope from Tektronix. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Additional Features:
Bandwidth: 150 MHz
2 Channels
Sample Rate: 100MS/s
Dual Timebase
2mV/div- 5V/div
Auto Setup, Auto Measure, Auto Pass/Fail, and Auto Sequencing.
SKU: n/a -
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
DatasheetSKU: n/a -
Noise Figure Meter
HP-Agilent/Keysight 8970A
Agilent HP 8970A Noise Figure Meter. Features and specifications of the HP 8970A include:
– Frequency Range: 10 MHz to 1600 MHz
– Noise Figure Measurement Range: 0 to 30 dB
– NF Instrumentation Uncertainty: +0.1 dB
– Gain Measurement Range: -20 to+40 dB
– Gain Instrumentation Uncertainty: +0.15 dB
– Input SWR reference impedence: <1.7 10 MHz to 1600 MHz
– Requires 346A/B/C noise source .
DatasheetSKU: n/a -
Low-Profile Modular Power System Mainframe
AGILENT – Hp/ Keysight N6700B
The Keysight N6700B is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700B offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
SKU: n/a -
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
SKU: n/a -
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
DatasheetSKU: n/a -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX TBS1202C
The TBS1000C Series Digital Storage Oscilloscope offers affordable performance in a compact design. It is designed to meet the needs of today's educational institutions, embedded design engineers, and maker community.
The instrument includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty.
The instrument comes with an innovative courseware system that integrates the lab exercises with step-by-step instructions for use, by the students.Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
DatasheetSKU: n/a -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
DatasheetSKU: n/a -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
SKU: n/a -
Frequency Counter
AGILENT – Hp/Keysight 53181A OPT 030 /3 GHZ
Optimized for RF applications, the single channel 10-digit 53181A measures frequency, period and peak voltage. A digit erase function allows you to easily delete unnecessary digits when you want to quickly read measurements. For higher frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5 or 12.4 GHz. A shallow, self-guided menu makes this meter exceptionally easy to use
RF frequency counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
Resolution of 10 digits/second
GPIB standardsKeysight Technologies, Inc.’s 53131A / 132A / 181A high-performance meters offer fast, accurate frequency measurements at an affordable price. These meters feature an intuitive user interface and one-button access to frequently used functions so you can take accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data and simultaneously acquire new readings, accelerating measurement speed. The technology, developed for Keysight’s line of high-end modulation domain analyzers, allows the meters to collect more data for each measurement, so you get higher resolution measurements in a fraction of the time it takes other meters. The 53131A / 132A / 181A meters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track mean, min/max and standard deviation. Automated limit testing allows you to set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within exceed/cut limits. Counters alert you to out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single key press recalls up to 20 different setups stored on the front panel. For computer-controlled system applications, each meter includes a standard GPIB interface with fully SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 communications-only interface provides support for printer or data transfer to a computer via a terminal emulation program.
SKU: n/a -
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
DatasheetSKU: n/a -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm DatasheetSKU: n/a -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX TBS1102B
The TBS1000B series of digital memory oscilloscopes offers high performance in a compact design at an affordable price. With its many standard features – USB port, 34 automatic measurements, limit test, data recording, and help the TBS 1000B series increases work efficiency.
Features100 MHz band
2-channel model
2 GS / s on all channels
Recording time with 2,500 points on all channels
Advanced activation, including one for pulse width and one for video selectable per line
34 automatic measurements and Dual window FFT
Integrated signal limit value test Expanded and automatic data logging
Automatic and auto-ranging signal installation
Integrated contextual aids Multilingual user interface
Active TFT color display (177.8mm)
Small footprint and low weight – only 124mm deep and 2kg weight.
DatasheetSKU: n/a -
Oscilloscope 2 channels
TEKTRONIX TBS1052C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions to display 50% more signal
Compact design; improved user and programming interface
Integrated courseware system integrates lab exercises with step-by-step instructions for students
HelpEverywhere® system provides useful tips and hints throughout the user interface
Triggering and acquisition modes for troubleshooting a variety of mixed signal designs
Educators can disable the autoset, cursors, and automated measurements to facilitate teaching basic concepts
DatasheetSKU: n/a -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
DatasheetSKU: n/a -
Cable
HUBER+SUHNER ENVIROFLEX 400,COAXIAL CABLE ,3m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M – SMA M 3m
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
DatasheetSKU: n/a -
Function/Arbitrary Waveform Generator
RIGOL DG1022Z
The Rigol DG1022Z is a 2 channel Function / Arbitrary Waveform Generator to create high quality signals up to 25 MHz (Sine) with very low jitter (200 ps) and the new SiFi (SIgnal FIdelity) technology. Beside the two analog outputs, the device includes an USB-Host- and an USB-device interface.
· Up to 200 MSa/s Sample Rate
· 14 bits vertical resolution
· 8 MPts standard; 16 MPts optional Memory Depth
· Up to 160 built-in waveforms
· ±1ppm frequency stability, -125dBc/Hz phase noise
The Rigol Function-generators have a sophisticated and easy to use interface and offer multiple functions for all tasks. The menu navigation is very intuitive and all functions and parameters are easy to locate thanks to the graphical interface.
Model DG1022Z DG1032Z DG1062Z
Max. Frequency 25 MHz 30 MHz 60 MHz
Memory 2 MPts (16 MPts optional) 8 MPts (16 MPts optional) 8 MPts (16 MPts optional)
Max. Sample rate 200 MSa/s 200 MSa/s 200 MSa/s
Resolution 1 µHz 1 µHz 1 µHz
Channels 2 2 2The devices have a filesystem for the storage of waveforms in the internal memory or on USB sticks.
The integrated helpfunction will show descriptions of single functions and step-by-step instructions for often used tasks.
DatasheetSKU: n/a€330.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106A
The mechanical calibration set for the VNA of the Rigol RSAxxxxN spectrum analysers. This set is designed for frequencies up to 6.5 GHz.
The set consists of:
-Open load (N male)
-Short load (N male)
-Load (N male)-Through adapter (N female – N female)
SKU: n/a€909.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106E
Accessory for the RSA3000 and RSA5000 “N” series.
High Performance Network Analysis Calibration Kit (Frequency Range: DC to 1.5GHz).
Vector Network Analysis (VNA) requires proper calibration. The CK106A and CK106E models are kits suitable for the Rigol RSA3000 and RSA5000, “N” series real time spectrum analyzers, ie for the models offering this option.
SKU: n/a€319.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
DatasheetSKU: n/a€6,990.00€9,590.00View Product
-
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1072C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
Datasheet -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2430
The 2430 is a 150 MHz, 2 channel digital oscilloscope from Tektronix. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Additional Features:
Bandwidth: 150 MHz
2 Channels
Sample Rate: 100MS/s
Dual Timebase
2mV/div- 5V/div
Auto Setup, Auto Measure, Auto Pass/Fail, and Auto Sequencing.
-
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Noise Figure Meter
HP-Agilent/Keysight 8970A
Agilent HP 8970A Noise Figure Meter. Features and specifications of the HP 8970A include:
– Frequency Range: 10 MHz to 1600 MHz
– Noise Figure Measurement Range: 0 to 30 dB
– NF Instrumentation Uncertainty: +0.1 dB
– Gain Measurement Range: -20 to+40 dB
– Gain Instrumentation Uncertainty: +0.15 dB
– Input SWR reference impedence: <1.7 10 MHz to 1600 MHz
– Requires 346A/B/C noise source .
Datasheet -
Low-Profile Modular Power System Mainframe
AGILENT – Hp/ Keysight N6700B
The Keysight N6700B is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700B offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
-
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1202C
The TBS1000C Series Digital Storage Oscilloscope offers affordable performance in a compact design. It is designed to meet the needs of today's educational institutions, embedded design engineers, and maker community.
The instrument includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty.
The instrument comes with an innovative courseware system that integrates the lab exercises with step-by-step instructions for use, by the students.Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
Datasheet -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
Datasheet -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Frequency Counter
AGILENT – Hp/Keysight 53181A OPT 030 /3 GHZ
Optimized for RF applications, the single channel 10-digit 53181A measures frequency, period and peak voltage. A digit erase function allows you to easily delete unnecessary digits when you want to quickly read measurements. For higher frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5 or 12.4 GHz. A shallow, self-guided menu makes this meter exceptionally easy to use
RF frequency counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
Resolution of 10 digits/second
GPIB standardsKeysight Technologies, Inc.’s 53131A / 132A / 181A high-performance meters offer fast, accurate frequency measurements at an affordable price. These meters feature an intuitive user interface and one-button access to frequently used functions so you can take accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data and simultaneously acquire new readings, accelerating measurement speed. The technology, developed for Keysight’s line of high-end modulation domain analyzers, allows the meters to collect more data for each measurement, so you get higher resolution measurements in a fraction of the time it takes other meters. The 53131A / 132A / 181A meters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track mean, min/max and standard deviation. Automated limit testing allows you to set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within exceed/cut limits. Counters alert you to out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single key press recalls up to 20 different setups stored on the front panel. For computer-controlled system applications, each meter includes a standard GPIB interface with fully SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 communications-only interface provides support for printer or data transfer to a computer via a terminal emulation program.
-
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1102B
The TBS1000B series of digital memory oscilloscopes offers high performance in a compact design at an affordable price. With its many standard features – USB port, 34 automatic measurements, limit test, data recording, and help the TBS 1000B series increases work efficiency.
Features100 MHz band
2-channel model
2 GS / s on all channels
Recording time with 2,500 points on all channels
Advanced activation, including one for pulse width and one for video selectable per line
34 automatic measurements and Dual window FFT
Integrated signal limit value test Expanded and automatic data logging
Automatic and auto-ranging signal installation
Integrated contextual aids Multilingual user interface
Active TFT color display (177.8mm)
Small footprint and low weight – only 124mm deep and 2kg weight.
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1052C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions to display 50% more signal
Compact design; improved user and programming interface
Integrated courseware system integrates lab exercises with step-by-step instructions for students
HelpEverywhere® system provides useful tips and hints throughout the user interface
Triggering and acquisition modes for troubleshooting a variety of mixed signal designs
Educators can disable the autoset, cursors, and automated measurements to facilitate teaching basic concepts
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400,COAXIAL CABLE ,3m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M – SMA M 3m
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet -
Function/Arbitrary Waveform Generator
RIGOL DG1022Z
The Rigol DG1022Z is a 2 channel Function / Arbitrary Waveform Generator to create high quality signals up to 25 MHz (Sine) with very low jitter (200 ps) and the new SiFi (SIgnal FIdelity) technology. Beside the two analog outputs, the device includes an USB-Host- and an USB-device interface.
· Up to 200 MSa/s Sample Rate
· 14 bits vertical resolution
· 8 MPts standard; 16 MPts optional Memory Depth
· Up to 160 built-in waveforms
· ±1ppm frequency stability, -125dBc/Hz phase noise
The Rigol Function-generators have a sophisticated and easy to use interface and offer multiple functions for all tasks. The menu navigation is very intuitive and all functions and parameters are easy to locate thanks to the graphical interface.
Model DG1022Z DG1032Z DG1062Z
Max. Frequency 25 MHz 30 MHz 60 MHz
Memory 2 MPts (16 MPts optional) 8 MPts (16 MPts optional) 8 MPts (16 MPts optional)
Max. Sample rate 200 MSa/s 200 MSa/s 200 MSa/s
Resolution 1 µHz 1 µHz 1 µHz
Channels 2 2 2The devices have a filesystem for the storage of waveforms in the internal memory or on USB sticks.
The integrated helpfunction will show descriptions of single functions and step-by-step instructions for often used tasks.
Datasheet -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106A
The mechanical calibration set for the VNA of the Rigol RSAxxxxN spectrum analysers. This set is designed for frequencies up to 6.5 GHz.
The set consists of:
-Open load (N male)
-Short load (N male)
-Load (N male)-Through adapter (N female – N female)
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106E
Accessory for the RSA3000 and RSA5000 “N” series.
High Performance Network Analysis Calibration Kit (Frequency Range: DC to 1.5GHz).
Vector Network Analysis (VNA) requires proper calibration. The CK106A and CK106E models are kits suitable for the Rigol RSA3000 and RSA5000, “N” series real time spectrum analyzers, ie for the models offering this option.
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet
-
RF Impedance/Material Analyzer
HP-Agilent/Keysight 4291B
Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to + 200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature)The Keysight 4291B RF impedance / material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric / magnetic materials. The Keysight 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT / MUT.
The Hp 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Hp 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Keysight 4291B. You do not need a separate instrument controller.
Material Evaluation
The Hp 4291B enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Hp 4291B provides the total dielectric / magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1072C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
Datasheet -
Function Generator
HP-Agilent/Keysight 8116A
The fully programmable HP 8116A features pulse as well as function generator capabilities in one small unit. A broad 1 mHz-50 MHz band for all waveforms and a wide choice of operating and modulating modes assure high flexibility. These factors, plus good repeatability, make the HP 8116A a sound, long-term investment.
HP's custom IC's have made it feasible to put the many HP 8116A capabilities into such a small volume. Handling is simplified by a unique, microprocessor-controlled, operating concept which ensures a clear overview of the compact front panel at all times. When the mode and waveform have been selected, illuminated labels show which parameters must be set.
Level or amplitude programming. The HP 8116A's output can be programmed in terms of high and low levels or in terms of amplitude and offset. Consequently a direct, automatic, conversion is always feasible so that the HP 8116A can be programmed in the same terms as the device is specified.
Safe limit. Devices can be protected by the limit feature. This prevents the output from exceeding a given magnitude.
Datasheet -
Oscilloscope 2 channels
TEKTRONIX 2430
The 2430 is a 150 MHz, 2 channel digital oscilloscope from Tektronix. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Additional Features:
Bandwidth: 150 MHz
2 Channels
Sample Rate: 100MS/s
Dual Timebase
2mV/div- 5V/div
Auto Setup, Auto Measure, Auto Pass/Fail, and Auto Sequencing.
-
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Noise Figure Meter
HP-Agilent/Keysight 8970A
Agilent HP 8970A Noise Figure Meter. Features and specifications of the HP 8970A include:
– Frequency Range: 10 MHz to 1600 MHz
– Noise Figure Measurement Range: 0 to 30 dB
– NF Instrumentation Uncertainty: +0.1 dB
– Gain Measurement Range: -20 to+40 dB
– Gain Instrumentation Uncertainty: +0.15 dB
– Input SWR reference impedence: <1.7 10 MHz to 1600 MHz
– Requires 346A/B/C noise source .
Datasheet -
Low-Profile Modular Power System Mainframe
AGILENT – Hp/ Keysight N6700B
The Keysight N6700B is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700B offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 – 300 W.
-
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Signal Generator
ANRITSU 69037B
The Anritsu 69037B is a used Synthesized CW Signal Generator. The Anritsu 69037B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. The 69037B offers the highest performance available on the market. The Anritsu 69037B is the leader in lowest phase noise performance.The 68C/69B is Anritsu’s premier broadband synthesizer line that offers solutions to any RF and Microwave application. It offers the highest performance available on the market. It is the leader in lowest phase noise performance.
The Anritsu 69037B is a basic signal source that provides accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.Additional Features:
Frequency range: 2 to 20 GHz
Output power without an attenuator: –15 dBm (–20 dBm typical)
Output power with an attenuator: –120 dBm
Output power with an electronic attenuator: –140 dBm
Ultra-low SSB phase noise and spurious
+17 dBm guaranteed leveled power to 20 GHz
<5 ms switching time for <100 MHz sweep steps Digital frequency sweep and digital power sweep Wide dynamic range with accurate output levels Intuitive, menu-driven front panel Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1202C
The TBS1000C Series Digital Storage Oscilloscope offers affordable performance in a compact design. It is designed to meet the needs of today's educational institutions, embedded design engineers, and maker community.
The instrument includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty.
The instrument comes with an innovative courseware system that integrates the lab exercises with step-by-step instructions for use, by the students.Features:
7-inch WVGA color display with 15 horizontal divisions that shows 50% more signal
32 automated measurements
Dual window FFT with simultaneous time and frequency domain views
Trigger frequency counter
Pan and Zoom capability
Multi-language user interface with support for 10 languages in the user
interface and front panel overlay
Small footprint and light weight
Fanless design contributes to low noise operation
Datasheet -
Power Sensor
HP-Agilent/Keysight R8486D
The R8486D diode waveguide power sensor measures average power over the frequency range 26.5 GHz to 40 GHz and power range -70 to -20 dBm (50 dB dynamic range).
Excellent SWR for reducing mismatch uncertainty
50 MHz calibration port
Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meter
Accurate average power measurements over -70 to -20 dBm
Frequency range 26.5 GHz to 40 GHz
Diode power sensing elementThe Keysight 11708A 30 dB attenuator is supplied with 8480 series power sensors with the “D” suffix, for calibration with the power meter 0 dBm, 50 MHz reference.
Datasheet -
NOISE SOURCE
HP-Agilent/Keysight R347B
La sorgente di rumore Keysight R347B copre una gamma di frequenza da 26,5 a 40 GHz. Questa sorgente di rumore a guida d'onda consente di effettuare misurazioni accurate e convenienti della figura di rumore su dispositivi a onde millimetriche. L'R347B fornisce un rumore a banda larga ad alta precisione all'ingresso del sistema o del componente in prova. Il misuratore della figura di rumore elabora quindi il rapporto ON/OFF della potenza di rumore presente nel sistema IF e fornisce una lettura accurata della figura di rumore e del guadagno. La sorgente di rumore R347B ha una notevole stabilità ENR nel tempo, che consente cicli di ricalibrazione più lunghi e misurazioni della figura di rumore più accurate. Prestazioni e affidabilità a frequenze millimetriche Eccellente stabilità ENR nel tempo Basso ROS
-
Frequency Counter
AGILENT – Hp/Keysight 53181A OPT 030 /3 GHZ
Optimized for RF applications, the single channel 10-digit 53181A measures frequency, period and peak voltage. A digit erase function allows you to easily delete unnecessary digits when you want to quickly read measurements. For higher frequency measurements, choose an optional second channel that provides measurements up to 1.5, 3, 5 or 12.4 GHz. A shallow, self-guided menu makes this meter exceptionally easy to use
RF frequency counter, 10 digits/s
One 225 MHz input channel, plus optional second channel up to 12.4 GHz
Resolution of 10 digits/second
GPIB standardsKeysight Technologies, Inc.’s 53131A / 132A / 181A high-performance meters offer fast, accurate frequency measurements at an affordable price. These meters feature an intuitive user interface and one-button access to frequently used functions so you can take accurate measurements quickly and easily. Real-time digital signal processing technology is used to analyze data and simultaneously acquire new readings, accelerating measurement speed. The technology, developed for Keysight’s line of high-end modulation domain analyzers, allows the meters to collect more data for each measurement, so you get higher resolution measurements in a fraction of the time it takes other meters. The 53131A / 132A / 181A meters offer built-in statistics and math functions so you can scale measurements and simultaneously measure and track mean, min/max and standard deviation. Automated limit testing allows you to set upper and lower limits for any measurement. An analog display mode lets you see at a glance whether a measurement is within exceed/cut limits. Counters alert you to out-of-limit conditions and can generate an output signal to trigger external devices when a limit is exceeded. For quick access to frequently used tests, a single key press recalls up to 20 different setups stored on the front panel. For computer-controlled system applications, each meter includes a standard GPIB interface with fully SCPI-compatible programmability and a data transfer rate of up to 200 fully formatted measurements per second. The standard RS-232 communications-only interface provides support for printer or data transfer to a computer via a terminal emulation program.
-
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
Datasheet -
Power Sensor
ANRITSU MA2472A
Anritsu MA2472A Power Sensor, 10 MHz to 18 GHz, -70 dBm to +20 dBm
The Anritsu MA2472A is a Standard Diode Sensor designed for use with the ML2430, ML2480 and ML2490 series power meters. They are designed for high dynamic range, high accuracy CW and TDMA measurements. These power sensors have 90 dB dynamic range and linearity better than 1.8% making them the choice for precision measurements. The 4 µs rise time of these sensors is fast enough for power measurements on GSM and similar TDMA systems that use GMSK modulation.
Features:Frequency Range: 10 MHz to 18 GHz
Dynamic Range: -70 to +20 dBm
Rise Time: <0.004 ms Sensor linearity: 1.8%, <18 GHz Temperature accuracy (5 to 50 degrees C.): <1.0% RF connector: N(m) Shipping weight: 2 lb; Size: 73 mm x 52 mm x 29 mm Datasheet -
BIRD SA-2500A
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option.
Bird's Site Analyzer is the user-friendly test solution for installing maintaining and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers service providers and contractors worldwide approve of the analyzers precision VSWR and Return Loss results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power of your base station.Features:
Easy operation for first-time, occasional or experienced users
Digital Power meter option compatible with Bird power sensors
Accurate and repeatable measurements
Immunity to on-channel interference (+13 dBm) for testing at co-located antenna sites
High-resolution color display
Fast sweep rate
On-screen comparison of live sweep and recalled trace
Unlimited trace overlays per report to compare antennas and track performance over time
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1102B
The TBS1000B series of digital memory oscilloscopes offers high performance in a compact design at an affordable price. With its many standard features – USB port, 34 automatic measurements, limit test, data recording, and help the TBS 1000B series increases work efficiency.
Features100 MHz band
2-channel model
2 GS / s on all channels
Recording time with 2,500 points on all channels
Advanced activation, including one for pulse width and one for video selectable per line
34 automatic measurements and Dual window FFT
Integrated signal limit value test Expanded and automatic data logging
Automatic and auto-ranging signal installation
Integrated contextual aids Multilingual user interface
Active TFT color display (177.8mm)
Small footprint and low weight – only 124mm deep and 2kg weight.
Datasheet -
Oscilloscope 2 channels
TEKTRONIX TBS1052C
Offering affordable performance in a compact design, the TBS1000C Oscilloscope provides the features, versatility and durability required by today's educational institutions, embedded designers, and maker community. The TBS1000C includes a 7-inch WVGA color display with up to 1 GS/s sample rate, bandwidths from 50 MHz to 200 MHz and a five-year warranty. Its innovative courseware system integrates lab exercises with step-by-step instructions for students. The HelpEverywhere® system provides useful tips and hints throughout the user interface to make the instrument more approachable to a new user.
Features:
7-inch WVGA color display with 15 horizontal divisions to display 50% more signal
Compact design; improved user and programming interface
Integrated courseware system integrates lab exercises with step-by-step instructions for students
HelpEverywhere® system provides useful tips and hints throughout the user interface
Triggering and acquisition modes for troubleshooting a variety of mixed signal designs
Educators can disable the autoset, cursors, and automated measurements to facilitate teaching basic concepts
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 2m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M- SMA M 2m
e ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.
The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400,COAXIAL CABLE ,3m
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – COLOR BLACK SMA M – SMA M 3m
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet -
Function/Arbitrary Waveform Generator
RIGOL DG1022Z
The Rigol DG1022Z is a 2 channel Function / Arbitrary Waveform Generator to create high quality signals up to 25 MHz (Sine) with very low jitter (200 ps) and the new SiFi (SIgnal FIdelity) technology. Beside the two analog outputs, the device includes an USB-Host- and an USB-device interface.
· Up to 200 MSa/s Sample Rate
· 14 bits vertical resolution
· 8 MPts standard; 16 MPts optional Memory Depth
· Up to 160 built-in waveforms
· ±1ppm frequency stability, -125dBc/Hz phase noise
The Rigol Function-generators have a sophisticated and easy to use interface and offer multiple functions for all tasks. The menu navigation is very intuitive and all functions and parameters are easy to locate thanks to the graphical interface.
Model DG1022Z DG1032Z DG1062Z
Max. Frequency 25 MHz 30 MHz 60 MHz
Memory 2 MPts (16 MPts optional) 8 MPts (16 MPts optional) 8 MPts (16 MPts optional)
Max. Sample rate 200 MSa/s 200 MSa/s 200 MSa/s
Resolution 1 µHz 1 µHz 1 µHz
Channels 2 2 2The devices have a filesystem for the storage of waveforms in the internal memory or on USB sticks.
The integrated helpfunction will show descriptions of single functions and step-by-step instructions for often used tasks.
Datasheet€330.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106A
The mechanical calibration set for the VNA of the Rigol RSAxxxxN spectrum analysers. This set is designed for frequencies up to 6.5 GHz.
The set consists of:
-Open load (N male)
-Short load (N male)
-Load (N male)-Through adapter (N female – N female)
€909.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL CK106E
Accessory for the RSA3000 and RSA5000 “N” series.
High Performance Network Analysis Calibration Kit (Frequency Range: DC to 1.5GHz).
Vector Network Analysis (VNA) requires proper calibration. The CK106A and CK106E models are kits suitable for the Rigol RSA3000 and RSA5000, “N” series real time spectrum analyzers, ie for the models offering this option.
€319.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065N
For all new order of RSA5000N versions we providing free of chargeand Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
The Real-Time Spectrum Analyzers of the RSA 5000 family simplify the monitoring and characterization of RF devices such as, for example, WiFi and Bluetooth.
The RSA5000 series real-time spectrum analyzer integrates in a single instrument five measurement modes to fully address all the demands posed by the recent and increasingly sophisticated RF test requirements.
In addition to the traditional GPSA mode, EMI, RTSA, VSA and VNA modes are offered. This tool reduces the time and cost of RF test development and with its performance greatly improves the development and testing of RF products. The user interface is clear and allows you to operate in different ways, buttons on the front panel, touch screen, mouse and keyboard. Remote communication interfaces are also available.
It is a very versatile tool and can be used with excellent results indifferently in education, in R&D, in industrial production.Features:
-Ultra-Real technology
-Displayed average noise level (DANL): <-165 dBm (typical)
-Phase noise: <-108 dBc/Hz (typical)
-Level measurement uncertainty: <0.8 dB
-Min. RBW 1 Hz
-Multiple measurement modes
-Various advanced measurement functions
-Multiple trigger modes and trigger masks
-Density, spectrogram, and other display modes
-PC software options
-10.1'' capacitive multi-touch screen, supporting touch gestures-USB, LAN, HDMI and other communication and display interfaces
Datasheet€6,990.00€9,590.00View Product