ItalianoShop
Showing 1051–1080 of 1386 results
-
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 924€549.00 View Product -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 738€670.00 View Product -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
SKU: n/a€589.00 View Product -
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
DatasheetSKU: n/a€710.00 View Product -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 923€549.00 View Product -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions.SKU: n/a€599.00 View Product -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
DatasheetSKU: n/a€729.00 View Product -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 922€419.00 View Product -
Power Supply
RIGOL DP831A
The Rigol DP831A is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 441€590.00 View Product -
419
Rigol DP832
The Rigol DP832 is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed nd easy to use interface offering comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 443€330.00€419.00View Product -
749
Rigol DP832A
The Rigol DP832A is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 442€590.00 View Product -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/OSKU: n/a€690.00 View Product -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
SKU: n/a€425.00 View Product -
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/OSKU: n/a€529.00 View Product -
Oscilloscope 2 channels
RIGOL DS1052E
igh-quality dual-channel digital oscilloscope with professional features at an unbelievable price. The simple to operate oscilloscope has a range of 50 MHz over a max. Sampling rate of 10 GS/s and a real-time Sampling rate of 1 GS/s The devices are equipped with colour monitor Classic controls, an auto-set function, the display of typical input signal values, and extensive on-screen help function all reduce initial training time and simplify operation. Numerous additional features make this oscilloscope a real value-for-money option for labs, schools and technical applications.
Highlights & Details1 GS/s Real time-Sampling rate
Integrated 1 Mpts memoryFacts
2-channel measurement and external trigger
Trigger functions for special signals: Edge, video, pulses Width, Slope and Alternate
64 k LC display
USB host, USB, RS232, P/F Out port
Math functions: +, -, x, FFT
Manual/Track or automatic unit
Integrated memory for 10 adjustments and 10 measurements.Delivery
2 probes (each 1:1/10:1)
Software
Power cord
Manual.
Two PVP2350 350 MHz passive HighZ probes
DatasheetSKU: 155€369.00 View Product -
Oscilloscope 4 channles
Rigol DS1074B
The Rigol DS1074B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 60MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1074B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1074B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 70 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1074B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1074B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1074B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1074B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 70MHz bandwidth and 2GSa/sSKU: 171 -
Oscilloscope 4 channles
Rigol DS1074Z
The Rigol DS1074Z is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda TecnicaSKU: 737€439.00 View Product -
Oscilloscope 4 channles
Rigol DS1074Z Plus
The Rigol DS1074Z-Plus is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda TecnicaSKU: 916€395.00 View Product -
Oscilloscope 4 channles
Rigol DS1074Z-S
The Rigol DS1074Z-S is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatascheetSKU: 915€619.00 View Product -
Oscilloscope 4 channles
RIGOL DS1074Z-S PLUS FREE 1104Z BANDWITH
The Rigol DS1074Z-S-Plus is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatascheetSKU: 915-1€579.00 View Product -
Oscilloscope 2 channels
Rigol DS1102E
The DS1000E Series Digital Oscilloscopes set a new standard for technology and capability. With features including 1 million points of deep memory, FFTs, record and replay, roll mode, alternate trigger mode, and adjustable trigger sensitivity the DS1000E is the new bench standard. 2 Analog channels plus external trigger
1 Million point deep memory
1 GSa/sec max sample rate
5.7” TFT QVGA (320X240) with 64K color LCD backlit display
Trigger modes: edge, pulse width, slope, video, pattern, continuous time, and alternate
DatasheetSKU: 156€429.00 View Product -
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
DatasheetSKU: n/a€218.00€255.00View Product -
Oscilloscope 4 channles
Rigol DS1104B
The Rigol DS1104B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 100MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1104B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1104B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 100 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1104B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1104B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1104B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1104B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 100MHz bandwidth and 2GSa/sSKU: 172 -
Oscilloscope 4 channles
Rigol DS1104Z
The Rigol DS1104Z is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z has a refresh rate of up to 30.000 wfms/ enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatasheetSKU: 735€579.00 View Product -
Oscilloscope 4 channles
Rigol DS1104Z Plus
The Rigol DS1104Z-Plus is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatascheetSKU: 914€370.00€439.00View Product -
Oscilloscope 4 channles
RIGOL DS1104Z-S
The Rigol DS1104Z-S is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatascheetSKU: 913€759.00 View Product -
Oscilloscope 4 channles
Rigol DS1104Z-S Plus
The Rigol DS1104Z-S-Plus is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
DatascheetSKU: 734€619.00 View Product -
Oscilloscope 2 channels
RIGOL DS1202Z-E
The Rigol Rigol DS1202Z-E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 200 MHz.
The Rigol DS1202Z-E is equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals.
The Rigol DS1202Z-E has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals.
The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
The Rigol Rigol DS1202Z-E oscilloscopes can store up to 24 million measurement points. You can zoom into a selected part of the captured waveforms to get more details and scroll within the measurement points.
The high sampling rate (up to 1 GSa/s) of the Rigol Rigol DS1202Z-E oscilloscopes and the large memory makes it possible to record up to 30,000 waveforms per second.
The recorded waveforms can be conveniently recorded, displayed and analyzed.“Multi-Level Grading Intensity” display, extensive signal characteristics with a very large number of measurement values can also be displayed completely.
The Rigol Rigol DS1202Z-E oscilloscopes offer extensive trigger options for a professional use. The special triggers Windows, Nth Edge, Delay, Timeout, Runt, RS232/UART, I²C und SPI are available as standard accessories.
With the Rigol DS1202Z-E serial data packages of different serial bus systems can be analyzed, decoded, and displayed directly as byte values. Supported protocols are: RS232/UART, I²C, and SPI.
The Rigol DS1202Z-E comes with a modern and advanced math system which lets it solve complicated signal calculations quite simply with predefined formulas.
Pass/fail testing can be used for troubleshooting in various environments like communication networks.
The %ARTICLE_NAME% measures up to five parameters like rise- and fall-time, amplitude, pulse width, duty cycle and many more simultaneously and shows statistics for every parameter (max- , min- and average values).
DatasheetSKU: n/a€285.00€330.00View Product
-
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
-
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
Datasheet -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions. -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
Datasheet -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
RIGOL DP831A
The Rigol DP831A is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
419
Rigol DP832
The Rigol DP832 is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed nd easy to use interface offering comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
749
Rigol DP832A
The Rigol DP832A is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
-
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O -
Oscilloscope 2 channels
RIGOL DS1052E
igh-quality dual-channel digital oscilloscope with professional features at an unbelievable price. The simple to operate oscilloscope has a range of 50 MHz over a max. Sampling rate of 10 GS/s and a real-time Sampling rate of 1 GS/s The devices are equipped with colour monitor Classic controls, an auto-set function, the display of typical input signal values, and extensive on-screen help function all reduce initial training time and simplify operation. Numerous additional features make this oscilloscope a real value-for-money option for labs, schools and technical applications.
Highlights & Details1 GS/s Real time-Sampling rate
Integrated 1 Mpts memoryFacts
2-channel measurement and external trigger
Trigger functions for special signals: Edge, video, pulses Width, Slope and Alternate
64 k LC display
USB host, USB, RS232, P/F Out port
Math functions: +, -, x, FFT
Manual/Track or automatic unit
Integrated memory for 10 adjustments and 10 measurements.Delivery
2 probes (each 1:1/10:1)
Software
Power cord
Manual.
Two PVP2350 350 MHz passive HighZ probes
Datasheet -
Oscilloscope 4 channles
Rigol DS1074B
The Rigol DS1074B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 60MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1074B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1074B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 70 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1074B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1074B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1074B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1074B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 70MHz bandwidth and 2GSa/s -
Oscilloscope 4 channles
Rigol DS1074Z
The Rigol DS1074Z is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda Tecnica -
Oscilloscope 4 channles
Rigol DS1074Z Plus
The Rigol DS1074Z-Plus is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda Tecnica -
Oscilloscope 4 channles
Rigol DS1074Z-S
The Rigol DS1074Z-S is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet -
Oscilloscope 4 channles
RIGOL DS1074Z-S PLUS FREE 1104Z BANDWITH
The Rigol DS1074Z-S-Plus is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet -
Oscilloscope 2 channels
Rigol DS1102E
The DS1000E Series Digital Oscilloscopes set a new standard for technology and capability. With features including 1 million points of deep memory, FFTs, record and replay, roll mode, alternate trigger mode, and adjustable trigger sensitivity the DS1000E is the new bench standard. 2 Analog channels plus external trigger
1 Million point deep memory
1 GSa/sec max sample rate
5.7” TFT QVGA (320X240) with 64K color LCD backlit display
Trigger modes: edge, pulse width, slope, video, pattern, continuous time, and alternate
Datasheet -
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
Datasheet -
Oscilloscope 4 channles
Rigol DS1104B
The Rigol DS1104B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 100MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1104B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1104B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 100 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1104B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1104B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1104B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1104B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 100MHz bandwidth and 2GSa/s -
Oscilloscope 4 channles
Rigol DS1104Z
The Rigol DS1104Z is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z has a refresh rate of up to 30.000 wfms/ enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datasheet -
Oscilloscope 4 channles
Rigol DS1104Z Plus
The Rigol DS1104Z-Plus is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet -
Oscilloscope 4 channles
RIGOL DS1104Z-S
The Rigol DS1104Z-S is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet -
Oscilloscope 4 channles
Rigol DS1104Z-S Plus
The Rigol DS1104Z-S-Plus is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet -
Oscilloscope 2 channels
RIGOL DS1202Z-E
The Rigol Rigol DS1202Z-E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 200 MHz.
The Rigol DS1202Z-E is equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals.
The Rigol DS1202Z-E has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals.
The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
The Rigol Rigol DS1202Z-E oscilloscopes can store up to 24 million measurement points. You can zoom into a selected part of the captured waveforms to get more details and scroll within the measurement points.
The high sampling rate (up to 1 GSa/s) of the Rigol Rigol DS1202Z-E oscilloscopes and the large memory makes it possible to record up to 30,000 waveforms per second.
The recorded waveforms can be conveniently recorded, displayed and analyzed.“Multi-Level Grading Intensity” display, extensive signal characteristics with a very large number of measurement values can also be displayed completely.
The Rigol Rigol DS1202Z-E oscilloscopes offer extensive trigger options for a professional use. The special triggers Windows, Nth Edge, Delay, Timeout, Runt, RS232/UART, I²C und SPI are available as standard accessories.
With the Rigol DS1202Z-E serial data packages of different serial bus systems can be analyzed, decoded, and displayed directly as byte values. Supported protocols are: RS232/UART, I²C, and SPI.
The Rigol DS1202Z-E comes with a modern and advanced math system which lets it solve complicated signal calculations quite simply with predefined formulas.
Pass/fail testing can be used for troubleshooting in various environments like communication networks.
The %ARTICLE_NAME% measures up to five parameters like rise- and fall-time, amplitude, pulse width, duty cycle and many more simultaneously and shows statistics for every parameter (max- , min- and average values).
Datasheet
-
Power Supply
Rigol DP811
The Rigol DP811 is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€549.00 View Product -
Power Supply
Rigol DP811A
The Rigol DP811A is a very high quality programmable laboratory power supply with a switchable output (20 V/10 A or 40 V/5 A) and a maximum power output of 200 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP811A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€670.00 View Product -
Power Supply, Programmable DC Electronic Loa
RIGOL DP813
The Rigol DP813 belongs to the Rigol DP800 series and has 1 channel. The power supply has two ranges that can be used on the single channel, 0-8V/0-20A and 0-20V/0-10A. The lab power supply has USB Host, USB Device interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 200W. The lab power supplies are equipped with a clear display where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
€589.00 View Product -
Power Supply
RIGOL DP813A
Technical specifications:
– Excellent linear regulation and load regulation ratio
– Fast transient response time: <50us
– Standard OVP / OCP / OTP protection functions
– Standard timing output
– Integrated V, A, W measurements and waveform display
– Independent control for each channel
– 3.5 inch TFT displayDifferences between + A and Non-A models:
– Support for more advanced functions: timer and delay output (are standard for all models), while recorder / analyzer / monitor / trigger functions (are standard for “+ A” models and optional for other models)
– Support of various interfaces: USB Host & Device (standard for all models), USB-GPIB (optional for all models), LAN / RS232 / Digital IO (standard for “+ A” models and optional for other models)
– The + A and Non-A models also differ in the values of some specifications, refer to the values shown in the datasheet.
Datasheet€710.00 View Product -
Power Supply
RIGOL DP821
The Rigol DP821 is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€549.00 View Product -
Power Supply
RIGOL DP822
DC power supply with 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
DP822A/DP822: 2 outputs, 20V/5A || 5V/16A, with remote Sense, total power up to 180W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP822A/DP822/DP821A/DP821: <350uVrms/2mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard for “+A” models and optional for other models)
5-inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard for “+A” models and optional for other models)
For DP822, the high-resolution setting, trigger, monitor, analyzer as well as the RS232 and LAN
communication functions are all optional functions.€599.00 View Product -
Power Supply
RIGOL DP822A
The Rigol DP822A has 2 channels, the first channel can supply a voltage of 0-20V and a current of 0-5A. The second channel can provide a voltage of 0-5V and a current of 0-16A. The lab power supply has USB Host/USB
Device, LAN, RS232 and Digital I/O interfaces. These Rigol lab power supplies are good value for money. They are very accurate and have a power up to 180W. The lab power supplies are equipped with a clear display
where the built-in voltage, current and power measurements are displayed. The power supplies can also be programmed with the supplied software using a PC.
Key Features & Specifications:
–Low Ripple Noise: <350uvrms / 2mvpp
–Fast Transient Response Time: < 50us
–Standard Timing Output
–Built in V / A / W Measurement and Waveform Display
–Output Analysis, Monitoring, Setting Preset and Other Functions
–Original 3.5-inch Tft Wide Screen Display
Datasheet€729.00 View Product -
Power Supply
Rigol DP831
The Rigol DP831 is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€419.00 View Product -
Power Supply
RIGOL DP831A
The Rigol DP831A is a very high quality programmable laboratory power supply with three switchable outputs (+8 V/5 A, +30 V/2 A and -30 V/2 A) and a maximum power output of 160 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP831A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€590.00 View Product -
419
Rigol DP832
The Rigol DP832 is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed nd easy to use interface offering comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832 features a relative large (8.9 cm / 3.5″) and easy to read TFT monochrome display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€330.00€419.00View Product -
749
Rigol DP832A
The Rigol DP832A is a very high quality programmable laboratory power supply with three switchable outputs (+30 V/3 A, +30 V/3 A and +5 V/3 A) and a maximum power output of 195 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP832A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€590.00 View Product -
Power Supply
RIGOL DP932A
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O€690.00 View Product -
Power Supply
RIGOL DP932E
The DP900 Series Power Supplies combine our new touch screen interface with new flexibility and higher speed functions designed for benchtop DC power analysis. The DP932A and DP932U are 3 channel completely isolated benchtop power supplies. Activate the high-speed arb function that allows you to update the power supply output at up to 10 times per second while quickly creating a repeating shape or pattern from the front panel. You can also combine channels 1 and 2 internally either in parallel or in series to expand the power envelope for your testing. No more cabling challenges since you can now get the current or voltage for both channels with one cable connection. The DP932A comes with all the capabilities enabled. The DP932U has optional resolution, digital IO, and arbitrary speed upgrades. The DP932U also comes with safety banana plugs in place of the binding posts on the DP932A. This combination of flexibility and capability makes the DP900 an important addition to any engineer’s bench.
€425.00 View Product -
Power Supply
RIGOL DP932U
DC power supply with 3 independent output channels (+32 V / 3 A, +32 V / 3 A, +6 V / 3 A, DC, max 210 W). 4.3-inch LCD color touch screen. Low output ripple and noise <350 μVrms/2 mVpp. Command processing time <10 ms. USB, LAN, and Digital I/O
3 electrically isolated independent channels with a maximum total power of up to 210 W
Voltage / Current CH1: 0 – +32 V / 0 – 3 A
Voltage / Current CH2: 0 – +32 V / 0 – 3 A
Voltage / Current CH3: 0 – +6 V / 0 – 3 A
4.3-inch LCD color touch screen
Front-panel safety sockets available on some models
Internal series/parallel connections for CH1 and CH2
Excellent programming/readback accuracy
Transient response time <50 μs
Low output ripple and noise <350 μVrms/2 mVpp
Command processing time <10 ms
Three rack-units (3U), 1/2-rack form factor
PC control
Timing output, data logging and analysis
A maximum of 512 arbitrary points with dwell time down to 100 ms; various built-in basic waveforms
Over voltage, over current, and over temperature protection
Various interfaces available: USB, LAN, and Digital I/O€529.00 View Product -
Oscilloscope 2 channels
RIGOL DS1052E
igh-quality dual-channel digital oscilloscope with professional features at an unbelievable price. The simple to operate oscilloscope has a range of 50 MHz over a max. Sampling rate of 10 GS/s and a real-time Sampling rate of 1 GS/s The devices are equipped with colour monitor Classic controls, an auto-set function, the display of typical input signal values, and extensive on-screen help function all reduce initial training time and simplify operation. Numerous additional features make this oscilloscope a real value-for-money option for labs, schools and technical applications.
Highlights & Details1 GS/s Real time-Sampling rate
Integrated 1 Mpts memoryFacts
2-channel measurement and external trigger
Trigger functions for special signals: Edge, video, pulses Width, Slope and Alternate
64 k LC display
USB host, USB, RS232, P/F Out port
Math functions: +, -, x, FFT
Manual/Track or automatic unit
Integrated memory for 10 adjustments and 10 measurements.Delivery
2 probes (each 1:1/10:1)
Software
Power cord
Manual.
Two PVP2350 350 MHz passive HighZ probes
Datasheet€369.00 View Product -
Oscilloscope 4 channles
Rigol DS1074B
The Rigol DS1074B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 60MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1074B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1074B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 70 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1074B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1074B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1074B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1074B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 70MHz bandwidth and 2GSa/s -
Oscilloscope 4 channles
Rigol DS1074Z
The Rigol DS1074Z is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda Tecnica€439.00 View Product -
Oscilloscope 4 channles
Rigol DS1074Z Plus
The Rigol DS1074Z-Plus is a very high quality four channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Scheda Tecnica€395.00 View Product -
Oscilloscope 4 channles
Rigol DS1074Z-S
The Rigol DS1074Z-S is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet€619.00 View Product -
Oscilloscope 4 channles
RIGOL DS1074Z-S PLUS FREE 1104Z BANDWITH
The Rigol DS1074Z-S-Plus is a very high quality four channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 70 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet€579.00 View Product -
Oscilloscope 2 channels
Rigol DS1102E
The DS1000E Series Digital Oscilloscopes set a new standard for technology and capability. With features including 1 million points of deep memory, FFTs, record and replay, roll mode, alternate trigger mode, and adjustable trigger sensitivity the DS1000E is the new bench standard. 2 Analog channels plus external trigger
1 Million point deep memory
1 GSa/sec max sample rate
5.7” TFT QVGA (320X240) with 64K color LCD backlit display
Trigger modes: edge, pulse width, slope, video, pattern, continuous time, and alternate
Datasheet€429.00 View Product -
Oscilloscope 2 channels
RIGOL DS1102Z-E
The DS1000Z-E Series identifies cost-effective, high-performance digital oscilloscopes. It is designed to meet different needs and finds applications for development, testing and education activities.
It covers all fields attributable to the traditional digital oscilloscope market.
Technical specifications:
ModelDS1102Z-E
Bandwidth100 MHz
Analog Channels2
Sample Rate1GSa / s (Single-channel), 500MSa / s (Dual-channel),
Max Memory Depth24Mpts (standard, single channel), 12 Mpts (dual-channel)
Max. Waveform Capture rate30,000 wfms / s
Real Time waveform Record and ReplayUp to 60,000 Frames
Std. ProbesTwo PVP2350 350 MHz passive HighZ probes
Datasheet€218.00€255.00View Product -
Oscilloscope 4 channles
Rigol DS1104B
The Rigol DS1104B is a high quality four channel digital storage oscilloscope. It offers up to 2GSa/s real-time sample rate and up to 100MHz bandwidth. It not only has compact design and 64K TFT color LCD, but also powerful functions: 7 trigger modes, adjustable trigger sensitivity, USB Host to support USB flash memory and USB printer, and other traditional functions of RIGOL oscilloscopes. The quality of the Rigol Oscilloscopes is comparable to Agilent and Tektronix oscilloscopes. Delivery including 4 probes, USB cable, pc software, power adapter and manual. General Data General Data DS1104B Display 5.7″ TFT LCD with 65536 colors Resolution 320 x 240 Pixel Size 325 x 159 x 133mm (12.80 x 6.26 x 5.24 inch) Weight 3 kg (6.61 lbs) Supported operation systems Windows XP(32Bit), Vista(32Bit), Windows 7(32Bit) Oscilloscope Details Oscilloscope Details DS1104B Channels 4 Real-time sample rate 2 GSa/s real time Bandwidth 100 MHz Sampling mode Normal, average (2, 4, 8, 16, 32, 64, 128, 256), peak detect Mathematics A+B, A-B, A×B, FFT (Fast Fourier Transform) FFT algorithm Rectangle, Hanning, Hamming, Blackman Signal DS1104B Max. Input voltage 300 Vrms CAT I Real-time sample rate 13 Sa/s to 2 GSa/s real time Time base 1 ns/Div. to 50 s/Div. (Steps 1 – 2 – 5) Memory 16 kpts (2 channels) 8 kpts (4 channels) Vertical DS1104B Analog digital converter (A/D) With the resolution of 8 bits, make sampling on both channels synchronously. Sensitivity range (V/div) 2 mV/Div to 10 V/Div. Displacement range ±10 Div. (2 mV – 10 V) Trigger DS1104B Trigger Channel 1/2/3/4, Ext, Ext / 5, AC Line Signal system and line/field frequency (Video triggering mode) Support the NTSC, PAL and SECAM broadcasting systems of any field or line frequency. Measurement DS1104B Cursor measurement Manual, Track and Auto Measure modes Auto measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall time, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Time Delay A-B, Time Delay A-B, Phase Delay A-B,- Phase Delay A-B
DSO with 100MHz bandwidth and 2GSa/s -
Oscilloscope 4 channles
Rigol DS1104Z
The Rigol DS1104Z is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z has a refresh rate of up to 30.000 wfms/ enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datasheet€579.00 View Product -
Oscilloscope 4 channles
Rigol DS1104Z Plus
The Rigol DS1104Z-Plus is a very high quality 4 channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet€370.00€439.00View Product -
Oscilloscope 4 channles
RIGOL DS1104Z-S
The Rigol DS1104Z-S is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1104Z-S has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet€759.00 View Product -
Oscilloscope 4 channles
Rigol DS1104Z-S Plus
The Rigol DS1104Z-S-Plus is a very high quality 4 channel digital storage oscilloscope with built-in 25 MHz bandwidth 2CH arbitrary waveform generator. The scope features a real-time sample rate of up to 1 GSa/s and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS1074Z-Plus has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
Datascheet€619.00 View Product -
Oscilloscope 2 channels
RIGOL DS1202Z-E
The Rigol Rigol DS1202Z-E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s and a bandwidth of 200 MHz.
The Rigol DS1202Z-E is equipped with well designed and easy to use control panels offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals.
The Rigol DS1202Z-E has a refresh rate of up to 30.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quicky. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals.
The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
The Rigol Rigol DS1202Z-E oscilloscopes can store up to 24 million measurement points. You can zoom into a selected part of the captured waveforms to get more details and scroll within the measurement points.
The high sampling rate (up to 1 GSa/s) of the Rigol Rigol DS1202Z-E oscilloscopes and the large memory makes it possible to record up to 30,000 waveforms per second.
The recorded waveforms can be conveniently recorded, displayed and analyzed.“Multi-Level Grading Intensity” display, extensive signal characteristics with a very large number of measurement values can also be displayed completely.
The Rigol Rigol DS1202Z-E oscilloscopes offer extensive trigger options for a professional use. The special triggers Windows, Nth Edge, Delay, Timeout, Runt, RS232/UART, I²C und SPI are available as standard accessories.
With the Rigol DS1202Z-E serial data packages of different serial bus systems can be analyzed, decoded, and displayed directly as byte values. Supported protocols are: RS232/UART, I²C, and SPI.
The Rigol DS1202Z-E comes with a modern and advanced math system which lets it solve complicated signal calculations quite simply with predefined formulas.
Pass/fail testing can be used for troubleshooting in various environments like communication networks.
The %ARTICLE_NAME% measures up to five parameters like rise- and fall-time, amplitude, pulse width, duty cycle and many more simultaneously and shows statistics for every parameter (max- , min- and average values).
Datasheet€285.00€330.00View Product