ItalianoShop
Showing 1021–1050 of 1386 results
-
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading displaySKU: 726 -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/ASKU: 1061 -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nmSKU: 1096 -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgradesSKU: n/a -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
SKU: n/a -
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
SKU: n/a -
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
DatasheetSKU: n/a -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
DatasheetSKU: n/a
-
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/A -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nm -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
-
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
-
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
Datasheet -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
Datasheet
-
Oscilloscope 4 channles
Rigol MSO4054
500MHz, 4 channel, 4GS/s
MSO4000 Series is the new mainstream digital scope to meet the customer’s applications with its innovative technology, industry leading specifications, powerful trigger functions and broad analysis capabilities. – Bandwidth 500MHz – Sample Rate Analog channel up to 4 GSa/s, Digital Channel up to 1 GSa/s(MSO) – Standard Memory depth: Analog channel up to 140 Mpts, Digital Channel up to 28 Mpts(MSO) – 4 Analog Channels, 16 Digital channels(MSO) – Waveform capture rate Up to 110,000 waveforms per second, – Real Time Waveform Record, Replay & Analysis(Std. up to 200,000 frames) – Lower noise floor, the Min. vertical sensitivity is 1mV/div – Innovative “UltraVision” technology – A variety of Trigger functions – Support serial bus trigger(Std.) and decoding(Opt.) for both analog and digital channels – Complete Connectivity: USB Host& Device, LAN(LXI-C), VGA, AUX,USB-GPIB(Opt.) – 9 inch WVGA(800X480), 256 level intensity grading display -
Power Meter
HP438A Dual Sensor Power Meter
The HP 438A power meter is a dual-channel power meter designed specifically for ATE systems. The compact front panel saves critical rack space, while the dual-channel design allows simple and accurate measurements of the ratio and difference of power levels from two separate sensors. This meter is compatible with the 8480 series of power sensors.
GPIB capability is standard on the 438A. For U.S. Air Force Modular Automatic Test Equipment (MATE) system application, Option 700 provides the 438A with the internal capability to be controlled by the MATE Control Interface Intermediate Language (CIIL).
* Two power sensors for multi-port measurement
* Ratio mode for measuring gain compression
* Programmable high and low power limits for unattended power monitoring
* Frequency: 100 kHz to 26.5 GHz
* Power Range: -70 to +44 dBm
* Dynamic Range: 50 dB
* Measurement Modes: A, B, A-B, B-A, A/B, B/A -
Fiber Optic Test Set
Exfo FOT-910
The EXFO FOT-910 is a Fiber Optic Test Set with Singlemode 1310nm, 1550nm. EXFO’s FOT-910 automated attenuation/ORL test set is an advanced-technology testing device, designed to save time and money by increasing the efficiency of fiber-testing crews. The FOT-910 measures relative loss (dB), absolute power (dBm), back-reflection (dB), and transmission equipment source stability. It tests bi-directional loss on a single fiber in 33 seconds. Single- or dual-wavelength (850/1300 nm or 1310/1550 nm) loss tests can be performed at the touch of a FasTesT button. On-site reference capability eliminates side-by-side source and meter referencing. Test results can be automatically stored in the non-volatile 680 register memory and printed out in report form. Stringent transmission requirements for high-bandwidth applications demand precise network component and connector back-reflection measurements. The FOT-910 measures back-reflection from 0 dB to -55 dB easily and stores the readings for fast reference.
1310nm-1550nm -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
-
Power Supply
HP/AGILENT/KEYSIGHT E3615A
HP basic DC power supplies offer essential features for a tight budget. The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A). The HP 60W, single output E3615A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.
The E3600 Series of low-cost benchtop power supplies give you the performance of system power supplies at a decent price. All E3600 family members provide clean power with excellent regulation and a fast transient response. The E3600 Series single-output non-programmable models are described on this page. Refer to page 3 for information on dual-output and triple-output non- programmable models.
All E3600 Series single-output non-programmable power supplies feature separate digital-panel meters for monitoring voltage and current simultaneously, giving you precise reading and control capability. All models also feature 10-turn potentiometers for accurate adjustment of voltage and current output settings.
With 0.01 percent load and line regulation, these instruments keep the output steady when power line and load changes occur.
The low normal mode noise specification of less than 200 μVrms ensures clean power for precision circuitry.In all single-output models, either the positive or negative terminal can be connected to ground, providing a positive or negative voltage output. Outputs can also be floated up to 240 V from ground.
These instruments also feature adjustable current limits, letting you set the safest current limit without having to short the output.
These popular 30-watt bench supplies are designed for general laboratory use. The constant-voltage, constant-current output allows operation as either a voltage or current source. The changeover occurs automatically, based on the load. Each of these models has two ranges, allowing more current at a lower voltage. For higher output voltages, supplies can be connected in series. These models also feature overload protection. A continuously acting constant current curcuit protects the power supply against all overloads including a direct short placed across the terminals in a constant voltage operation.
These fexible 60-watt, single-range power supplies can be used as either voltage or current sources. When the output terminal voltage increases to a preset shut-down level, an overvoltage protection circuit disables the output to protect the device under test (DUT) for damage. The overvoltage protection feature can be easily monitored and adjusted from the front panel.
Using the remote sensing capability, these instruments automatically compensate for voltage drop in the load leads, so you obtain an accurate voltage at the DUT.
Using the remote analog voltage programming capability, these instruments can remotely vary the voltage, so you are able to control the regulation output voltage or current.
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
- Range 1: 0 to 20 V, 0 to 3 A
- Range 2: NA
- Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
- Voltage rms: 200 µV
- Peak-to-Peak: 1 mV
Load & Line Regulation
- 0.01% + 2 mV
Meter Resolution
- Voltage: 10 mV (0-20 V), 100 mV (>20 V)
- Current: 10 mA
-
Signal Generator
HP-Agilent/Keysight 83650A
The Agilent 83650A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83650A to achieve low single-sideband phase noise performance. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.
Features:
Scan modulation to simulate antenna scan patterns
Accurate fixed and swept frequency offset for two-tone measurement
User flatness correction for leveling at remote points in the test system
General purpose source for use in component test, receiver test and for frequency conversion
Sweep Modes: Step, List, Ramp
Maximum Power: +10 dBm 26.5 GHz
Maximum Power: +2.5 dBm >40 GHz
Power Sweep Range: -20 dBm to maximum power
Phase Noise (50 GHz at 10 KHz): -68 dBc
Max FM Deviation (locked): +/- 8 MHz
Datasheet -
Pulse Pattern Generator
AGILENT-Hp/Keysight 81101A
The Keysight 81101A 50 MHz single-channel Pulse Generator is the economy, entry-level instrument of the 81100 family. All timing parameters (repetition rate, delay, width and transitions) are variable.
The instrument comprises a PLL oscillator that enables the repetition rate to be kept within 0.01% accuracy.
Double-pulses and pulse bursts are available. All pulses can be triggered externally when the PLL is turned off. Bursts can also be triggered by the internal PLL if it is not in use as the repetition-rate generator. An external width (pulse recovery) mode is available, too.
The selectable 50/1000 Ohm source resistance allows output amplitudes up to 10 or 20 Vpp respectively into a 50 Ohm load.
Single-channel pulse generator
50 MHz, 10 V from 50 Ohm into 50 Ohm
Triggerable / PLL operation selectable
Pulse / burst modes selectable
Variable transition times
BNC outputs, single-ended
Datasheet