ItalianoShop
Showing 901–930 of 1386 results
-
Directional Couper
Mini-Circuits ZFDC-10-5-S+
Mini-Circuits ZFDC-10-5-S+ is a 10.8 dB Directional Coupler, 1 – 2000 MHz, 50Ω
Connector Type: SMA
Features
• very wideband, 1 to 2000 MHz
• excellent directivity, 30 dB typ.
• rugged shielded caseApplications
• cellular
• instrumentation
• communication receivers & transmitters
• GPS
DatasheetSKU: n/a -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
SKU: n/a -
MOTOROLA STORNO CPQ7000 SINGLE UNIT RAPID RATE CHARGE–ELN1022A
The CQP7000 was introduced to the Storno model line-up in 1988. There were three basic models, no keypad, limited keypad with display and full keypad with display. Known as the CQP7000a, b and c they were the Storno branded versions of the Motorola MX1000, 2000 and 3000. A wide variety of specific models and options were available with up to 100 channels and transmit powers up to 6W VHF and 5W at UHF.
The Storno 7000 was constructed in three main parts, the radio housing and baseplate assembly which had all the front and side button actuators and contacts for the separate battery. The internals consisted of the front shield which carried the LCD display, speaker, keypad membrane, personality EEPROM and controller of the peripheral electronics (COPE). The front shield clipped over the frame assembly which housed the top panel controls, the main circuit board with controller of the radio electronics (CORE), and the plug-in RF modules.
The CQP7000 supported a wide range of tone signalling standards, channel scanning and user programmable memory features, enhanced by the eight character alphanumeric display. Special options included submersible, encrypted, intrinsically safe and Storno PhoneNet 2200 trunked system compatible versions..
DatasheetSKU: n/a
-
Directional Couper
Mini-Circuits ZFDC-10-5-S+
Mini-Circuits ZFDC-10-5-S+ is a 10.8 dB Directional Coupler, 1 – 2000 MHz, 50Ω
Connector Type: SMA
Features
• very wideband, 1 to 2000 MHz
• excellent directivity, 30 dB typ.
• rugged shielded caseApplications
• cellular
• instrumentation
• communication receivers & transmitters
• GPS
Datasheet -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
-
MOTOROLA STORNO CPQ7000 SINGLE UNIT RAPID RATE CHARGE–ELN1022A
The CQP7000 was introduced to the Storno model line-up in 1988. There were three basic models, no keypad, limited keypad with display and full keypad with display. Known as the CQP7000a, b and c they were the Storno branded versions of the Motorola MX1000, 2000 and 3000. A wide variety of specific models and options were available with up to 100 channels and transmit powers up to 6W VHF and 5W at UHF.
The Storno 7000 was constructed in three main parts, the radio housing and baseplate assembly which had all the front and side button actuators and contacts for the separate battery. The internals consisted of the front shield which carried the LCD display, speaker, keypad membrane, personality EEPROM and controller of the peripheral electronics (COPE). The front shield clipped over the frame assembly which housed the top panel controls, the main circuit board with controller of the radio electronics (CORE), and the plug-in RF modules.
The CQP7000 supported a wide range of tone signalling standards, channel scanning and user programmable memory features, enhanced by the eight character alphanumeric display. Special options included submersible, encrypted, intrinsically safe and Storno PhoneNet 2200 trunked system compatible versions..
Datasheet
-
Directional Couper
Mini-Circuits ZFDC-10-5-S+
Mini-Circuits ZFDC-10-5-S+ is a 10.8 dB Directional Coupler, 1 – 2000 MHz, 50Ω
Connector Type: SMA
Features
• very wideband, 1 to 2000 MHz
• excellent directivity, 30 dB typ.
• rugged shielded caseApplications
• cellular
• instrumentation
• communication receivers & transmitters
• GPS
Datasheet -
LASER SCAN MICROMETER
MITUTOYO LSM3000
The Mitutoyo LSM-3000 Laser Scan Micrometer Display Unit is an-accurate, non-contact measuring system capable of measuring workpieces at a high speed using a highly directional scanning laser beam.
This non-contact optical measuring system is capable of measuring workpieces which are difficult to measure with conventional measuring instruments. It performs simple and accurate measurement of brittle or elastic objects, high temperature objects, objects which must be kept clean, and soft objects which may be deformed and suffer dimensional changes due to the measuring force used.
-
MOTOROLA STORNO CPQ7000 SINGLE UNIT RAPID RATE CHARGE–ELN1022A
The CQP7000 was introduced to the Storno model line-up in 1988. There were three basic models, no keypad, limited keypad with display and full keypad with display. Known as the CQP7000a, b and c they were the Storno branded versions of the Motorola MX1000, 2000 and 3000. A wide variety of specific models and options were available with up to 100 channels and transmit powers up to 6W VHF and 5W at UHF.
The Storno 7000 was constructed in three main parts, the radio housing and baseplate assembly which had all the front and side button actuators and contacts for the separate battery. The internals consisted of the front shield which carried the LCD display, speaker, keypad membrane, personality EEPROM and controller of the peripheral electronics (COPE). The front shield clipped over the frame assembly which housed the top panel controls, the main circuit board with controller of the radio electronics (CORE), and the plug-in RF modules.
The CQP7000 supported a wide range of tone signalling standards, channel scanning and user programmable memory features, enhanced by the eight character alphanumeric display. Special options included submersible, encrypted, intrinsically safe and Storno PhoneNet 2200 trunked system compatible versions..
Datasheet