ItalianoShop
Showing 871–900 of 1386 results
-
Spectrum Analyzer
Tektronix 2715
The synthesized spectrum analyzer Tektronix 2715 was created to measurement needs of television channels with an infinite number of possibilities of automatic measurements for TV. In addition to having special features for measures TV, the 2715 is also a more than performance spectrum analyzer, fully programmable, storage capacity of 108 screens.
The 2715 Cable TV Spectrum Analyzer now includes automated tests for both analog and digitally-modulated channels. When you are ready to begin installing digital transmission of video, data or voice, the 2715 is ready to help.
After setting up the 2715 with the new, companion Cable TV RF Measurement Software for Windows, the analyzer automatically determines the correct measurements for each channel type – analog, digital, FM or pilot.> Very accurate in frequency.
> Demodulator: AM-FM-TV
> Max. Frequency: 1.8 GHz
> Min. Frequency: 9 kHz> In-service Measurements Minimize Program Interruption, Reduce Cost of Acquiring > Performance Data – Compatible with NTSC and PAL Systems
> Digital Channel Measurements Are Ready When You Are – Characterize Averaged > Power; Check Noise and Distortions that Can Worsen BER – Applicable to QAM, QPSK, QPR, VSB and OFDM Signals
> Addresses All FCC Proof of Performance Measurements
> Cable TV Measurements Enhance Measurement Repeatability and Reduce Technician Training Time
> Carrier Level, Carrier Frequency, Carrier-to-noise, Hum/LFD and Other Key
> Measurements Execute Automatically from Easy-to-use, On-screen Menu
> Unattended and Remote Measurement Modes Reduce Personnel Requirements in the Field
> 75 Ohm Input with Quick-change F and BNC Connectors Reduce Repair Costs and Minimize Down Time
> Enhanced Troubleshooting Power with Built-in Preamplifier, Audio and Video Demodulation – All Standard
> Frequency Coverage to 2.15 GHz, with Opt. 50 and 75, Can View Downconverted Satellite Signals (L-Band)
> Includes Windows-compatible PC Software for Programmed Measurement Configuration, Data Collection, Measurement Results Printouts, Limits Checking, Alarming and Control of a Locally or Remotely-located 2715
> High Portability, On-board Nonvolatile Memory, Four Digital Displays for Spectral Display Storage and Comparison, Plus True Analog, Continuous Gray Scale Display for Detecting Low Level Beats and Spurs Amidst Noise and Active Video> In-service Proof-of-performance Tests
> Digital Service Installation and Troubleshooting
> Ingress DetectionSKU: 681 -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
SKU: 1006 -
Microwave Counter/Power Meter
HP 5347A – 20 GHz Microwave Counter/Power Meter
The HP 5347A 20 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the HP 5347A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as HP's standalone power meters. The high-performance frequency counter measures frequency from 10 Hz to 20 GHz.
With only five function keys, the HP 5347A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the HP 5347A ideal for taking portable measurements.
* True power meter performance
* Negligible power meter error
* Outstanding frequency measurements
* Built-in sensor calibration tables save time
* External DC operation for greater measurement flexibility
* Supports three HP power sensorsSKU: n/a -
Coaxial Dual-Directional Coupler
FAIRVIEW MICROWAVE SD3241
Coaxial DC block SD3241 is only one of a large number of radio frequency DC blocking components specifically stocked to be ready for quick shipment. Fairview Microwave RF DC block is manufactured with a SMA connector in and SMA connector out. Our SMA to SMA DC block is male to female genders in and out.
Fairview Microwave SMA DC block has a 50 Ohm impedance and an inner design. Our 50 Ohm SMA inner DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 18 GHz. SD3241 SMA inner DC block has a maximum insertion loss of 1 dB and a maximum VSWR of 1.35:1.
Inner DC block specs for this Fairview direct current blocking component can be found on its DC block datasheet PDF specifications above. Inner SMA DC block is one radio frequency component of more than one million microwave and millimeter wave RF parts in stock at Fairview and is ready to buy and can be shipped worldwide. Fairview also maintains a wide selection of other radio frequency DC blocks that ship same-day from our Allen, TX warehouse in the as with the rest of our other RF/microwave and millimeter wave components.Block Type Inner
Impedance 50 Ohm
Connector In Series SMA
Connector In Gender Male
Connector Out Series SMA
Connector Out Gender Female
Minimum Frequency 10 MHz
Maximum Frequency 18 GHz
Maximum VSWR 1.35:1
Maximum Voltage 50 Volts
DatasheetSKU: n/a -
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
SKU: n/a -
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS ModeSKU: n/a -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-60 M3
Main features:
9 kHz~6.3 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100 MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
1GHz phase noise: -114 dBc/Hz@10kHz
1GHz DANL: -167 dBm/Hz
Weight 168 grams (core module), size 142mm×54mm×16mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 oC/-40 oC to 70 oC (option)
Built-in OCXO (option), temperature drift≤0.15 ppm
USB3.0/2.0 Type-C interfaceSKU: n/a
-
Spectrum Analyzer
Tektronix 2715
The synthesized spectrum analyzer Tektronix 2715 was created to measurement needs of television channels with an infinite number of possibilities of automatic measurements for TV. In addition to having special features for measures TV, the 2715 is also a more than performance spectrum analyzer, fully programmable, storage capacity of 108 screens.
The 2715 Cable TV Spectrum Analyzer now includes automated tests for both analog and digitally-modulated channels. When you are ready to begin installing digital transmission of video, data or voice, the 2715 is ready to help.
After setting up the 2715 with the new, companion Cable TV RF Measurement Software for Windows, the analyzer automatically determines the correct measurements for each channel type – analog, digital, FM or pilot.> Very accurate in frequency.
> Demodulator: AM-FM-TV
> Max. Frequency: 1.8 GHz
> Min. Frequency: 9 kHz> In-service Measurements Minimize Program Interruption, Reduce Cost of Acquiring > Performance Data – Compatible with NTSC and PAL Systems
> Digital Channel Measurements Are Ready When You Are – Characterize Averaged > Power; Check Noise and Distortions that Can Worsen BER – Applicable to QAM, QPSK, QPR, VSB and OFDM Signals
> Addresses All FCC Proof of Performance Measurements
> Cable TV Measurements Enhance Measurement Repeatability and Reduce Technician Training Time
> Carrier Level, Carrier Frequency, Carrier-to-noise, Hum/LFD and Other Key
> Measurements Execute Automatically from Easy-to-use, On-screen Menu
> Unattended and Remote Measurement Modes Reduce Personnel Requirements in the Field
> 75 Ohm Input with Quick-change F and BNC Connectors Reduce Repair Costs and Minimize Down Time
> Enhanced Troubleshooting Power with Built-in Preamplifier, Audio and Video Demodulation – All Standard
> Frequency Coverage to 2.15 GHz, with Opt. 50 and 75, Can View Downconverted Satellite Signals (L-Band)
> Includes Windows-compatible PC Software for Programmed Measurement Configuration, Data Collection, Measurement Results Printouts, Limits Checking, Alarming and Control of a Locally or Remotely-located 2715
> High Portability, On-board Nonvolatile Memory, Four Digital Displays for Spectral Display Storage and Comparison, Plus True Analog, Continuous Gray Scale Display for Detecting Low Level Beats and Spurs Amidst Noise and Active Video> In-service Proof-of-performance Tests
> Digital Service Installation and Troubleshooting
> Ingress Detection -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
-
Microwave Counter/Power Meter
HP 5347A – 20 GHz Microwave Counter/Power Meter
The HP 5347A 20 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the HP 5347A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as HP's standalone power meters. The high-performance frequency counter measures frequency from 10 Hz to 20 GHz.
With only five function keys, the HP 5347A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the HP 5347A ideal for taking portable measurements.
* True power meter performance
* Negligible power meter error
* Outstanding frequency measurements
* Built-in sensor calibration tables save time
* External DC operation for greater measurement flexibility
* Supports three HP power sensors -
Coaxial Dual-Directional Coupler
FAIRVIEW MICROWAVE SD3241
Coaxial DC block SD3241 is only one of a large number of radio frequency DC blocking components specifically stocked to be ready for quick shipment. Fairview Microwave RF DC block is manufactured with a SMA connector in and SMA connector out. Our SMA to SMA DC block is male to female genders in and out.
Fairview Microwave SMA DC block has a 50 Ohm impedance and an inner design. Our 50 Ohm SMA inner DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 18 GHz. SD3241 SMA inner DC block has a maximum insertion loss of 1 dB and a maximum VSWR of 1.35:1.
Inner DC block specs for this Fairview direct current blocking component can be found on its DC block datasheet PDF specifications above. Inner SMA DC block is one radio frequency component of more than one million microwave and millimeter wave RF parts in stock at Fairview and is ready to buy and can be shipped worldwide. Fairview also maintains a wide selection of other radio frequency DC blocks that ship same-day from our Allen, TX warehouse in the as with the rest of our other RF/microwave and millimeter wave components.Block Type Inner
Impedance 50 Ohm
Connector In Series SMA
Connector In Gender Male
Connector Out Series SMA
Connector Out Gender Female
Minimum Frequency 10 MHz
Maximum Frequency 18 GHz
Maximum VSWR 1.35:1
Maximum Voltage 50 Volts
Datasheet -
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS Mode -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-60 M3
Main features:
9 kHz~6.3 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100 MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
1GHz phase noise: -114 dBc/Hz@10kHz
1GHz DANL: -167 dBm/Hz
Weight 168 grams (core module), size 142mm×54mm×16mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 oC/-40 oC to 70 oC (option)
Built-in OCXO (option), temperature drift≤0.15 ppm
USB3.0/2.0 Type-C interface
-
Spectrum Analyzer
Tektronix 2715
The synthesized spectrum analyzer Tektronix 2715 was created to measurement needs of television channels with an infinite number of possibilities of automatic measurements for TV. In addition to having special features for measures TV, the 2715 is also a more than performance spectrum analyzer, fully programmable, storage capacity of 108 screens.
The 2715 Cable TV Spectrum Analyzer now includes automated tests for both analog and digitally-modulated channels. When you are ready to begin installing digital transmission of video, data or voice, the 2715 is ready to help.
After setting up the 2715 with the new, companion Cable TV RF Measurement Software for Windows, the analyzer automatically determines the correct measurements for each channel type – analog, digital, FM or pilot.> Very accurate in frequency.
> Demodulator: AM-FM-TV
> Max. Frequency: 1.8 GHz
> Min. Frequency: 9 kHz> In-service Measurements Minimize Program Interruption, Reduce Cost of Acquiring > Performance Data – Compatible with NTSC and PAL Systems
> Digital Channel Measurements Are Ready When You Are – Characterize Averaged > Power; Check Noise and Distortions that Can Worsen BER – Applicable to QAM, QPSK, QPR, VSB and OFDM Signals
> Addresses All FCC Proof of Performance Measurements
> Cable TV Measurements Enhance Measurement Repeatability and Reduce Technician Training Time
> Carrier Level, Carrier Frequency, Carrier-to-noise, Hum/LFD and Other Key
> Measurements Execute Automatically from Easy-to-use, On-screen Menu
> Unattended and Remote Measurement Modes Reduce Personnel Requirements in the Field
> 75 Ohm Input with Quick-change F and BNC Connectors Reduce Repair Costs and Minimize Down Time
> Enhanced Troubleshooting Power with Built-in Preamplifier, Audio and Video Demodulation – All Standard
> Frequency Coverage to 2.15 GHz, with Opt. 50 and 75, Can View Downconverted Satellite Signals (L-Band)
> Includes Windows-compatible PC Software for Programmed Measurement Configuration, Data Collection, Measurement Results Printouts, Limits Checking, Alarming and Control of a Locally or Remotely-located 2715
> High Portability, On-board Nonvolatile Memory, Four Digital Displays for Spectral Display Storage and Comparison, Plus True Analog, Continuous Gray Scale Display for Detecting Low Level Beats and Spurs Amidst Noise and Active Video> In-service Proof-of-performance Tests
> Digital Service Installation and Troubleshooting
> Ingress Detection -
40-Channel Armature Multiplexer
HP-Agilent/Keysight 34921A
34921A 40-Channel Armature Multiplexer for 34980A The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications. Four additional fused inputs (44 channels total) route up to 1A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. – 40 2-wire channels – 300V, 1A switch- 2A carry current – 100 ch/s scanning – Mix 2- or 4-wire configurations – Built-in thermocouple reference junction – 4 current channels – Latching armature relays, with relay counter
-
Microwave Counter/Power Meter
HP 5347A – 20 GHz Microwave Counter/Power Meter
The HP 5347A 20 GHz Microwave Counter/Power Meter offers the convenience of a single instrument that makes frequency and power measurements with accuracy and resolution comparable to stand-alone instruments. As a true power meter, the HP 5347A offers excellent dynamic range, linearity, and accuracy. It uses the same proven power sensors as HP's standalone power meters. The high-performance frequency counter measures frequency from 10 Hz to 20 GHz.
With only five function keys, the HP 5347A is especially easy to use. Its rugged, lightweight package, along with an optional internal battery that provides up to two hours of cordless measurements, makes the HP 5347A ideal for taking portable measurements.
* True power meter performance
* Negligible power meter error
* Outstanding frequency measurements
* Built-in sensor calibration tables save time
* External DC operation for greater measurement flexibility
* Supports three HP power sensors -
Coaxial Dual-Directional Coupler
FAIRVIEW MICROWAVE SD3241
Coaxial DC block SD3241 is only one of a large number of radio frequency DC blocking components specifically stocked to be ready for quick shipment. Fairview Microwave RF DC block is manufactured with a SMA connector in and SMA connector out. Our SMA to SMA DC block is male to female genders in and out.
Fairview Microwave SMA DC block has a 50 Ohm impedance and an inner design. Our 50 Ohm SMA inner DC block is rated for a minimum frequency of 10 MHz and a maximum frequency of 18 GHz. SD3241 SMA inner DC block has a maximum insertion loss of 1 dB and a maximum VSWR of 1.35:1.
Inner DC block specs for this Fairview direct current blocking component can be found on its DC block datasheet PDF specifications above. Inner SMA DC block is one radio frequency component of more than one million microwave and millimeter wave RF parts in stock at Fairview and is ready to buy and can be shipped worldwide. Fairview also maintains a wide selection of other radio frequency DC blocks that ship same-day from our Allen, TX warehouse in the as with the rest of our other RF/microwave and millimeter wave components.Block Type Inner
Impedance 50 Ohm
Connector In Series SMA
Connector In Gender Male
Connector Out Series SMA
Connector Out Gender Female
Minimum Frequency 10 MHz
Maximum Frequency 18 GHz
Maximum VSWR 1.35:1
Maximum Voltage 50 Volts
Datasheet -
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Synthesized Sweep Generator
WILTRON ANRITSU 68169B
The Anritsu Wiltron 68169B 40.0 GHz Synthesized Sweep Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range.
•Frequency Range: 0.01GHz to 40GHz
•Output Power Range: -15dBm to 13dBm
•Power Resolution: 0.01dB
•Output Accuracy: 2dB
•Output Impedance: 50Ohms
•Single Side Band Noise: -96dBc/Hz to -60dBc/Hz
•Internal AM,FM, phase and pulse modulation
•User down-loaded complex modulation
•Self-test, Secure mode, Reset
•Master/slave operation
•360B SS Mode -
compact real-time spectrum analyzer/receiver
HAROGIC SAM-60 M3
Main features:
9 kHz~6.3 GHz real-time spectrum analyzer/receiver
Integrated 100 kHz-6.3 GHz analog signal generator (option)
100 MHz analysis bandwidth, 300 GHz/sec spectrum sweep speed
FPGA based digital signal processing
1GHz phase noise: -114 dBc/Hz@10kHz
1GHz DANL: -167 dBm/Hz
Weight 168 grams (core module), size 142mm×54mm×16mm, power consumption 7-10 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from -20 oC/-40 oC to 70 oC (option)
Built-in OCXO (option), temperature drift≤0.15 ppm
USB3.0/2.0 Type-C interface