ItalianoShop
Showing 781–810 of 1386 results
-
SWITCH SYSTEM
KEITHLEY 7001
is the “veteran” of the Keithley line of scanners. The mainframe switch model 7001 has 2 free card slots. The user can install various multiplexers or matrix cards. Therefore, this scanner can be equipped with up to 80 channels per mainframe; a “master / slave” arrangement allows extension to hundreds of channels. The electrical signals to be switched determine the board model. The signal level starts from picoampere to amperes and from microvolts to kilovolts. All cards can also be used with the larger model 7002, which offers 10 slots instead of 2
SKU: n/a -
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
DatasheetSKU: n/a -
bipolar operational power supply/amplifier
KEPCO BOP72-6D
KEPCO BOP72-6D is a bipolar operational power supply/amplifier with 72V, 6A and 400W.
Kepco’s BOP bipolar power supplies are available in 100W, 200W and 400W sizes. For applications requiring higher power, see Kepco’s 1KW High Power BOP. For applications requiring higher voltage, Kepco’s Series BOP-HV are available in 500V and 1000V models.
BOP are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. They are not general purpose power supplies. By the nature of the bipolar high speed design, they do not have any energy-storage noise discriminating output capacitors. These power supplies offer ultra low noise and ultra low ripple at the output.
Resistive Loads. To realize the full high speed potential of BOP, the load characteristics should be mainly resistive.
Inductive Loads. Kepco’s 200W (except BOP 200-1M) and 400W L option BOP models are optimized for driving inductive loads. This option makes the BOP suitable for a wide variety of applications such as motor testing, testing of magnetic components (coils, speakers, etc.), industrial applications with inductive loads, driving CRT coils, cryogenic applications and powering correcting magnets for medical imaging applications or particle accelerators.
Capacitive Loads. Kepco’s 200 Watt and 400 Watt C option BOP models are optimized for driving capacitive loads. This option makes the BOP suitable for a wide variety of applications such as solar cell/panel testing, driving and testing piezo-electric devices, capacitor testing, driving and testing capacitive transducers, and power for industrial or lab applications with capacitive or capacitive-resistive loads.
Operational Amplifier. BOP, while fully rated power supplies, are also high-powered operational amplifiers with full 4-quadrant, bipolar operation. Their output is capable of both sustained d-c and the replication of arbitrary a-c waveforms. The Kepco’s BOP is the recommended operational amplifier for measuring Power Supply Rejection Ratio in an Audio Precision Knowledge Base Technote.
In Kepco's BOP, the voltage and current outputs can be controlled smoothly and linearly through the entire rated plus and minus ranges, passing smoothly through zero with no polarity switching.
Remote Digital Control. BOP accept BIT plug-in cards for remote digital control; cards may be factory-installed. BIT 4886 provides 16-bit IEEE 488.2 talk-listen control with SCPI support.
SKU: n/a -
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
DatasheetSKU: n/a -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
DatasheetSKU: n/a -
Power Supply
KEYSIGHT N8940A
KEYSIGHT N8940A Alimentatore CC con autoranging, 80 V, 170 A, 5000 W, 400 V CA.
La serie Keysight N8900 offre alimentazione CC programmabile a uscita singola programmabile da 5 kW, 10 kW e 15 kW per applicazioni ATE che richiedono la giusta quantità di prestazioni al giusto prezzo. La caratteristica di uscita a regolazione automatica degli alimentatori serie N8900 consente una flessibilità senza precedenti offrendo una vasta gamma di combinazioni di tensione e corrente a piena potenza. Gli alimentatori con caratteristiche di uscita “rettangolari” o tradizionali forniscono piena potenza con una sola combinazione di tensione e corrente. Solo un N8900 fa il lavoro di più alimentatori. È come avere molti alimentatori in uno!
La serie N8900 offre potenza di uscita stabile, misurazioni di tensione e corrente incorporate e tensione e corrente di uscita con autorangolazione da 80 V a 1500 V e da 10 A a 510 A. Questi alimentatori offrono molte funzionalità pronte per il sistema come interfacce I / O standard multiple per semplificare e accelerare lo sviluppo del sistema di test e il design compatto 3U per risparmiare spazio nel rack. Se è necessaria più potenza, è possibile mettere in parallelo più unità N8900 per creare un “unico” alimentatore con> 100 kW di potenza totale in uscita. Il controllo master / slave incorporato consente la programmazione come se fosse solo un grande alimentatore; non è necessario programmare ciascuna fornitura singolarmente.Uscita autoranging – fa il lavoro di più alimentatori!
Potenza di uscita massima di 5 kW, 10 kW e 15 kW
Fino a 1500 V e fino a 510 A
14 diverse combinazioni di tensione, corrente e potenza disponibili in 208 V CA o 400 V CA (28 modelli in totale)
La giusta quantità di prestazioni al giusto prezzo
Unità facilmente parallele per creare un “unico” alimentatore con> 100 kW di potenza
Misura di tensione e corrente incorporata
Alta densità di potenza, 15 kW in soli 3U (5,25 “/ 13,34 cm)
Protezione da sovratensione, sovracorrente e sovratemperatura
Interfacce LAN (LXI Core), USB, GPIB e analogiche tutte standardValori nominali DC
Voltaggio: da 0 a 80 V.
Corrente: da 0 a 170 A
Potenza: 5000 W.Ingresso AC
Intervallo di tensione: 360-440 V CA.
Accuratezza della programmazione
Tensione: 0,1% del fondo scala
Corrente: 0,2% del fondo scala
Scheda TecnicaSKU: n/a -
Oscilloscope 4 channles
LECROY LC534A
The LC534A is a 1 GHz, 4 Channel digital oscilloscope from LeCroy. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Features:
1 GHz Bandwidth
4 Channels
2 GS/s Single-Shot Sample Rate
4 ms Maximum Sample Rate Window
96 MHz PowerPC Microprocessor
8 MB System RAM
9” Color Display with 8 Traces
Analog Persistence
Full Screen Grid
The LeCroy LC534A is a 4 Channel Digital Oscilloscope with a 1 GHz Bandwidth, 500 MS/s sample rate, and a 100 kpts Record Length.
DatasheetSKU: n/a
-
SWITCH SYSTEM
KEITHLEY 7001
is the “veteran” of the Keithley line of scanners. The mainframe switch model 7001 has 2 free card slots. The user can install various multiplexers or matrix cards. Therefore, this scanner can be equipped with up to 80 channels per mainframe; a “master / slave” arrangement allows extension to hundreds of channels. The electrical signals to be switched determine the board model. The signal level starts from picoampere to amperes and from microvolts to kilovolts. All cards can also be used with the larger model 7002, which offers 10 slots instead of 2
-
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
Datasheet -
bipolar operational power supply/amplifier
KEPCO BOP72-6D
KEPCO BOP72-6D is a bipolar operational power supply/amplifier with 72V, 6A and 400W.
Kepco’s BOP bipolar power supplies are available in 100W, 200W and 400W sizes. For applications requiring higher power, see Kepco’s 1KW High Power BOP. For applications requiring higher voltage, Kepco’s Series BOP-HV are available in 500V and 1000V models.
BOP are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. They are not general purpose power supplies. By the nature of the bipolar high speed design, they do not have any energy-storage noise discriminating output capacitors. These power supplies offer ultra low noise and ultra low ripple at the output.
Resistive Loads. To realize the full high speed potential of BOP, the load characteristics should be mainly resistive.
Inductive Loads. Kepco’s 200W (except BOP 200-1M) and 400W L option BOP models are optimized for driving inductive loads. This option makes the BOP suitable for a wide variety of applications such as motor testing, testing of magnetic components (coils, speakers, etc.), industrial applications with inductive loads, driving CRT coils, cryogenic applications and powering correcting magnets for medical imaging applications or particle accelerators.
Capacitive Loads. Kepco’s 200 Watt and 400 Watt C option BOP models are optimized for driving capacitive loads. This option makes the BOP suitable for a wide variety of applications such as solar cell/panel testing, driving and testing piezo-electric devices, capacitor testing, driving and testing capacitive transducers, and power for industrial or lab applications with capacitive or capacitive-resistive loads.
Operational Amplifier. BOP, while fully rated power supplies, are also high-powered operational amplifiers with full 4-quadrant, bipolar operation. Their output is capable of both sustained d-c and the replication of arbitrary a-c waveforms. The Kepco’s BOP is the recommended operational amplifier for measuring Power Supply Rejection Ratio in an Audio Precision Knowledge Base Technote.
In Kepco's BOP, the voltage and current outputs can be controlled smoothly and linearly through the entire rated plus and minus ranges, passing smoothly through zero with no polarity switching.
Remote Digital Control. BOP accept BIT plug-in cards for remote digital control; cards may be factory-installed. BIT 4886 provides 16-bit IEEE 488.2 talk-listen control with SCPI support.
-
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
Datasheet -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
Power Supply
KEYSIGHT N8940A
KEYSIGHT N8940A Alimentatore CC con autoranging, 80 V, 170 A, 5000 W, 400 V CA.
La serie Keysight N8900 offre alimentazione CC programmabile a uscita singola programmabile da 5 kW, 10 kW e 15 kW per applicazioni ATE che richiedono la giusta quantità di prestazioni al giusto prezzo. La caratteristica di uscita a regolazione automatica degli alimentatori serie N8900 consente una flessibilità senza precedenti offrendo una vasta gamma di combinazioni di tensione e corrente a piena potenza. Gli alimentatori con caratteristiche di uscita “rettangolari” o tradizionali forniscono piena potenza con una sola combinazione di tensione e corrente. Solo un N8900 fa il lavoro di più alimentatori. È come avere molti alimentatori in uno!
La serie N8900 offre potenza di uscita stabile, misurazioni di tensione e corrente incorporate e tensione e corrente di uscita con autorangolazione da 80 V a 1500 V e da 10 A a 510 A. Questi alimentatori offrono molte funzionalità pronte per il sistema come interfacce I / O standard multiple per semplificare e accelerare lo sviluppo del sistema di test e il design compatto 3U per risparmiare spazio nel rack. Se è necessaria più potenza, è possibile mettere in parallelo più unità N8900 per creare un “unico” alimentatore con> 100 kW di potenza totale in uscita. Il controllo master / slave incorporato consente la programmazione come se fosse solo un grande alimentatore; non è necessario programmare ciascuna fornitura singolarmente.Uscita autoranging – fa il lavoro di più alimentatori!
Potenza di uscita massima di 5 kW, 10 kW e 15 kW
Fino a 1500 V e fino a 510 A
14 diverse combinazioni di tensione, corrente e potenza disponibili in 208 V CA o 400 V CA (28 modelli in totale)
La giusta quantità di prestazioni al giusto prezzo
Unità facilmente parallele per creare un “unico” alimentatore con> 100 kW di potenza
Misura di tensione e corrente incorporata
Alta densità di potenza, 15 kW in soli 3U (5,25 “/ 13,34 cm)
Protezione da sovratensione, sovracorrente e sovratemperatura
Interfacce LAN (LXI Core), USB, GPIB e analogiche tutte standardValori nominali DC
Voltaggio: da 0 a 80 V.
Corrente: da 0 a 170 A
Potenza: 5000 W.Ingresso AC
Intervallo di tensione: 360-440 V CA.
Accuratezza della programmazione
Tensione: 0,1% del fondo scala
Corrente: 0,2% del fondo scala
Scheda Tecnica -
Oscilloscope 4 channles
LECROY LC534A
The LC534A is a 1 GHz, 4 Channel digital oscilloscope from LeCroy. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Features:
1 GHz Bandwidth
4 Channels
2 GS/s Single-Shot Sample Rate
4 ms Maximum Sample Rate Window
96 MHz PowerPC Microprocessor
8 MB System RAM
9” Color Display with 8 Traces
Analog Persistence
Full Screen Grid
The LeCroy LC534A is a 4 Channel Digital Oscilloscope with a 1 GHz Bandwidth, 500 MS/s sample rate, and a 100 kpts Record Length.
Datasheet
-
SWITCH SYSTEM
KEITHLEY 7001
is the “veteran” of the Keithley line of scanners. The mainframe switch model 7001 has 2 free card slots. The user can install various multiplexers or matrix cards. Therefore, this scanner can be equipped with up to 80 channels per mainframe; a “master / slave” arrangement allows extension to hundreds of channels. The electrical signals to be switched determine the board model. The signal level starts from picoampere to amperes and from microvolts to kilovolts. All cards can also be used with the larger model 7002, which offers 10 slots instead of 2
-
Oscilloscope 2 channels
KENWOOD CS-4125
Kenwood CS-4125 20MHz 2-Channel Analog Oscilloscope. Kenwood CS-4125 20MHz 2-Channel Oscilloscope Features High reliability with Kenwood Original Hibrid ICs High-intensity CRT (12 kV) (with scale illumination) Dynamic range with a headroom for accurate waveform display without distortion High sensitivity of 1 mV/div (DC to 5 MHz) Maximum sweep rate of 20 ns/div (x10 MAG) FIX sync One-touch TV sync Convenient VERT mode One-touch ALT/CHOP switching X-Y Mode Vertical axis signal output connector Waveforms can be observed by applying intensity modulation. Added or subtracted waveforms can be observed. The trace inclination can be corrected with the front panel operation. Relay-type attenuators with long life and excellent operability are used. Kenwood TMI Corp. CS-4125 Oscilloscope, Analog: 20MHz, 2 Channel (Stand alone) The Kenwood TMI Corp. CS-4125 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis. The Kenwood TMI Corp. CS-4125 oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions,
Datasheet -
bipolar operational power supply/amplifier
KEPCO BOP72-6D
KEPCO BOP72-6D is a bipolar operational power supply/amplifier with 72V, 6A and 400W.
Kepco’s BOP bipolar power supplies are available in 100W, 200W and 400W sizes. For applications requiring higher power, see Kepco’s 1KW High Power BOP. For applications requiring higher voltage, Kepco’s Series BOP-HV are available in 500V and 1000V models.
BOP are high speed power operational amplifiers that can be used to provide dynamically agile voltage for test and simulation. They are not general purpose power supplies. By the nature of the bipolar high speed design, they do not have any energy-storage noise discriminating output capacitors. These power supplies offer ultra low noise and ultra low ripple at the output.
Resistive Loads. To realize the full high speed potential of BOP, the load characteristics should be mainly resistive.
Inductive Loads. Kepco’s 200W (except BOP 200-1M) and 400W L option BOP models are optimized for driving inductive loads. This option makes the BOP suitable for a wide variety of applications such as motor testing, testing of magnetic components (coils, speakers, etc.), industrial applications with inductive loads, driving CRT coils, cryogenic applications and powering correcting magnets for medical imaging applications or particle accelerators.
Capacitive Loads. Kepco’s 200 Watt and 400 Watt C option BOP models are optimized for driving capacitive loads. This option makes the BOP suitable for a wide variety of applications such as solar cell/panel testing, driving and testing piezo-electric devices, capacitor testing, driving and testing capacitive transducers, and power for industrial or lab applications with capacitive or capacitive-resistive loads.
Operational Amplifier. BOP, while fully rated power supplies, are also high-powered operational amplifiers with full 4-quadrant, bipolar operation. Their output is capable of both sustained d-c and the replication of arbitrary a-c waveforms. The Kepco’s BOP is the recommended operational amplifier for measuring Power Supply Rejection Ratio in an Audio Precision Knowledge Base Technote.
In Kepco's BOP, the voltage and current outputs can be controlled smoothly and linearly through the entire rated plus and minus ranges, passing smoothly through zero with no polarity switching.
Remote Digital Control. BOP accept BIT plug-in cards for remote digital control; cards may be factory-installed. BIT 4886 provides 16-bit IEEE 488.2 talk-listen control with SCPI support.
-
Date Acquisition/Switch Unit
KEYSIGHT – Agilent/Hp 34972A
3-slot mainframe with USB and LAN
6 1/2-digit (22-bit) internal DMM, scanning up to 250 channels per second
8 switch and control plug-in modules to choose from
Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance; frequency and period
50k readings of non-volatile memory holds data when power is removed
Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequencesThe Keysight 34970A data acquisition / data logger switch unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or hassles of signal-conditioning accessories. Choose from eight optional plug-in modules to create a compact data logger, full-featured data acquisition system or low-cost switching unit. On-module screw-terminal connections eliminate the need for terminal blocks and a unique relay maintenance feature counts every closure on every switch for easy, predictable relay maintenance. Our most popular module 34901A features a built-in thermocouple reference and 20 two-wire channels.
Datasheet -
Power Supply
KEYSIGHT – Agilent/Hp N8740A
Keysight's basic DC power supplies offer essential features for a tight budget. The Keysight N8740A is a 150 V, 22 A, 3300 W, single output power supply in a small 2U package. It offers flexible AC input options, analog/resistance control of output voltage and current, as well as parallel and series connection of multiple supplies to achieve more output current or voltage respectively.
Please select the AC input voltage option carefully. The AC input voltage hardware is permanently installed at the factory and cannot be changed under any circumstances after delivery. If the wrong AC input voltage option is purchased and delivered, the unit would need to be returned. Product returns are subject to Keysight approval and applicable charges. A new order would then have to be placed.
DC output ratingsVoltage: 150 V
Current: 22 A
Power: 3300 WProgramming accuracy
Voltage: 0.05% + 75 mV
Current: 0.1% + 44 mAOutput ripple and noise
CV p-p: 100 mV
CV rms: 25 mV
Datasheet -
Power Supply
KEYSIGHT N8940A
KEYSIGHT N8940A Alimentatore CC con autoranging, 80 V, 170 A, 5000 W, 400 V CA.
La serie Keysight N8900 offre alimentazione CC programmabile a uscita singola programmabile da 5 kW, 10 kW e 15 kW per applicazioni ATE che richiedono la giusta quantità di prestazioni al giusto prezzo. La caratteristica di uscita a regolazione automatica degli alimentatori serie N8900 consente una flessibilità senza precedenti offrendo una vasta gamma di combinazioni di tensione e corrente a piena potenza. Gli alimentatori con caratteristiche di uscita “rettangolari” o tradizionali forniscono piena potenza con una sola combinazione di tensione e corrente. Solo un N8900 fa il lavoro di più alimentatori. È come avere molti alimentatori in uno!
La serie N8900 offre potenza di uscita stabile, misurazioni di tensione e corrente incorporate e tensione e corrente di uscita con autorangolazione da 80 V a 1500 V e da 10 A a 510 A. Questi alimentatori offrono molte funzionalità pronte per il sistema come interfacce I / O standard multiple per semplificare e accelerare lo sviluppo del sistema di test e il design compatto 3U per risparmiare spazio nel rack. Se è necessaria più potenza, è possibile mettere in parallelo più unità N8900 per creare un “unico” alimentatore con> 100 kW di potenza totale in uscita. Il controllo master / slave incorporato consente la programmazione come se fosse solo un grande alimentatore; non è necessario programmare ciascuna fornitura singolarmente.Uscita autoranging – fa il lavoro di più alimentatori!
Potenza di uscita massima di 5 kW, 10 kW e 15 kW
Fino a 1500 V e fino a 510 A
14 diverse combinazioni di tensione, corrente e potenza disponibili in 208 V CA o 400 V CA (28 modelli in totale)
La giusta quantità di prestazioni al giusto prezzo
Unità facilmente parallele per creare un “unico” alimentatore con> 100 kW di potenza
Misura di tensione e corrente incorporata
Alta densità di potenza, 15 kW in soli 3U (5,25 “/ 13,34 cm)
Protezione da sovratensione, sovracorrente e sovratemperatura
Interfacce LAN (LXI Core), USB, GPIB e analogiche tutte standardValori nominali DC
Voltaggio: da 0 a 80 V.
Corrente: da 0 a 170 A
Potenza: 5000 W.Ingresso AC
Intervallo di tensione: 360-440 V CA.
Accuratezza della programmazione
Tensione: 0,1% del fondo scala
Corrente: 0,2% del fondo scala
Scheda Tecnica -
Oscilloscope 4 channles
LECROY LC534A
The LC534A is a 1 GHz, 4 Channel digital oscilloscope from LeCroy. Measure voltage or current signals over time in an electronic circuit or component to display amplitude, frequency and rise times, etc. Applications include troubleshooting, production test, and design.
Features:
1 GHz Bandwidth
4 Channels
2 GS/s Single-Shot Sample Rate
4 ms Maximum Sample Rate Window
96 MHz PowerPC Microprocessor
8 MB System RAM
9” Color Display with 8 Traces
Analog Persistence
Full Screen Grid
The LeCroy LC534A is a 4 Channel Digital Oscilloscope with a 1 GHz Bandwidth, 500 MS/s sample rate, and a 100 kpts Record Length.
Datasheet