ItalianoShop
Showing 721–750 of 1386 results
-
Mass Memory
HP-Agilent/Keysight 85620A
Mass Memory Module with Phase Noise Utility pre-installed.
Key Features & Specifications
Permits unattended, automatic operation without an external controller, ideal for semi-automated bench top test
Stores complex measurement routines for single-key execution
Stores up to 100 traces
Adds powerful capabilities to all Keysight 8560A, 8560B, and 8560E-series spectrum analyzersDescription
The 85620A mass memory module is a plug-in module for the 8560A, 8560B and 8560E-series portable spectrum analyzers. The 85620A is a standard feature of the Keysight 8560EC-series spectrum analyzers. It adds measurement personality capability, enough memory to store 100 traces, memory-card capability, and computer capability without an external controller. Create complex measurement routines and save then as single-key measurements stored on memory cards or in the module's 128 KB of battery-backed RAM.
SKU: 337 -
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
SKU: 478 -
Power Meter
HP-Agilent/Keysight 436A
The Keysight 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements. It is compatible with the entire series of 8480 power sensors. The 436A measures either absolute or relative power. It displays absolute power in either watts or dBm, and relative power in dB. The 436A offers intuitive and straightforward manual operation as well as optional GPIB programmability (Option 022).
Display readings in Watts, dBm or dB relative eliminating measurement conversion
Peaking meter for analog adjustments
Cal factor to compensate each sensor for improved accuracy
Frequency Range: 100 kHz to 110 GHz
Power Range: -70 to +44 dBm
Power Accuracy: ±0.5%
Power Reference: Internal 50 MHz oscillator/Type-N output
DatasheetSKU: 1069 -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. DatasheetSKU: 1138 -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm SMA M- SMA M
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
DatasheetSKU: n/a
-
Mass Memory
HP-Agilent/Keysight 85620A
Mass Memory Module with Phase Noise Utility pre-installed.
Key Features & Specifications
Permits unattended, automatic operation without an external controller, ideal for semi-automated bench top test
Stores complex measurement routines for single-key execution
Stores up to 100 traces
Adds powerful capabilities to all Keysight 8560A, 8560B, and 8560E-series spectrum analyzersDescription
The 85620A mass memory module is a plug-in module for the 8560A, 8560B and 8560E-series portable spectrum analyzers. The 85620A is a standard feature of the Keysight 8560EC-series spectrum analyzers. It adds measurement personality capability, enough memory to store 100 traces, memory-card capability, and computer capability without an external controller. Create complex measurement routines and save then as single-key measurements stored on memory cards or in the module's 128 KB of battery-backed RAM.
-
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
-
Power Meter
HP-Agilent/Keysight 436A
The Keysight 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements. It is compatible with the entire series of 8480 power sensors. The 436A measures either absolute or relative power. It displays absolute power in either watts or dBm, and relative power in dB. The 436A offers intuitive and straightforward manual operation as well as optional GPIB programmability (Option 022).
Display readings in Watts, dBm or dB relative eliminating measurement conversion
Peaking meter for analog adjustments
Cal factor to compensate each sensor for improved accuracy
Frequency Range: 100 kHz to 110 GHz
Power Range: -70 to +44 dBm
Power Accuracy: ±0.5%
Power Reference: Internal 50 MHz oscillator/Type-N output
Datasheet -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm SMA M- SMA M
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet
-
Mass Memory
HP-Agilent/Keysight 85620A
Mass Memory Module with Phase Noise Utility pre-installed.
Key Features & Specifications
Permits unattended, automatic operation without an external controller, ideal for semi-automated bench top test
Stores complex measurement routines for single-key execution
Stores up to 100 traces
Adds powerful capabilities to all Keysight 8560A, 8560B, and 8560E-series spectrum analyzersDescription
The 85620A mass memory module is a plug-in module for the 8560A, 8560B and 8560E-series portable spectrum analyzers. The 85620A is a standard feature of the Keysight 8560EC-series spectrum analyzers. It adds measurement personality capability, enough memory to store 100 traces, memory-card capability, and computer capability without an external controller. Create complex measurement routines and save then as single-key measurements stored on memory cards or in the module's 128 KB of battery-backed RAM.
-
OPTICAL SPECTRUM ANALYZER
ANRITSU MS9710C
The MS9710C is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 1750 nm wavelength band. In addition to uses such as measurement of LD and LED spectra, it has functions for measuring the transmission characteristics of passive elements such as optical isolators, as well as NF/Gain of optical fiber amplifier systems. In addition to its basic features, the superior stability and reliability of the diffraction grating (patent pending) offer the severe level and wavelength specifications particularly in the WDM band. This analyzer has the dynamic range, reception sensitivity and sweep speed requested by users, backed by Anritsu’s highlevel technology. The high sensitivity meets the exacting demands placed on today’s measuring instruments. In particular, the excellent wavelength and level specifications fully meet the dense WDM requirements (1520 to 1620 nm). The MS9710C Optical Spectrum Analyzer is the successor to the popular MS9710B but with improved functions and higher performance. The specifications have been upgraded for the important 1.55 µm band for WDM communications and have also been optimised to include the new requirements for the L-band (1570 to 1620 nm) use. In addition to the high reliability and excellent basic performance, this analyzer has a full range of application functions to support accurate measurement in the fastest possible time.
-
Power Meter
HP-Agilent/Keysight 436A
The Keysight 436A power meter is a general-purpose digital power meter intended for manual and automatic radio-frequency (RF) and microwave-power measurements. It is compatible with the entire series of 8480 power sensors. The 436A measures either absolute or relative power. It displays absolute power in either watts or dBm, and relative power in dB. The 436A offers intuitive and straightforward manual operation as well as optional GPIB programmability (Option 022).
Display readings in Watts, dBm or dB relative eliminating measurement conversion
Peaking meter for analog adjustments
Cal factor to compensate each sensor for improved accuracy
Frequency Range: 100 kHz to 110 GHz
Power Range: -70 to +44 dBm
Power Accuracy: ±0.5%
Power Reference: Internal 50 MHz oscillator/Type-N output
Datasheet -
Signal Generator
HP-Agilent/Keysight 8656B
100 kHz to 990 MHz frequency coverage
<35 ms frequency switching speed AM and FM capabilities ±1 dB level accuracy Amplitude offset and phase adjust capabilities The Keysight 8656B is a programmable synthesized signal generator that combines performance, quality, and economy, covering the 0.1 to 990 MHz frequency range. Offering ±1 dB level accuracy and 0.1 dB resolution with calibrated output levels over the +13 to -127 dBm range, the Keysight 8656B provides precise output control. In addition, its modulation capabilities include simultaneous and mixed modulation modes from internal (400 Hz and 1 KHz tones) and external sources. These features create a versatile signal generator, for use in a variety if applications. Datasheet -
Cable
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm
HUBER+SUHNER ENVIROFLEX 400 COAXIAL CABLE – 1200mm SMA M- SMA M
The ENVIROFLEX 400 cable is suitable for a frequency range up to 6 GHz.
The RF line is flexible and recommended for wireless communication and HF applications.The Enviroflex cable family enables users to quickly switch from fluorine-containing cables to halogen-free alternatives. The materials used in the cable design – both for the dielectric and for the jacket – do not
include any fluorine-consisting plastics. The dimensions of the individual cable types are entirely compatible with the international RG standards. Standard connectors can be used without any restrictions with the Enviroflex cable family. HUBER+SUHNER´s control of various key technologies has proven to be an invaluable advantage.
Datasheet