ItalianoShop
Showing 661–690 of 1386 results
-
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
SKU: 1293 -
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
DatasheetSKU: n/a -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshootingSKU: n/a -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
SKU: n/a -
compact real-time spectrum analyzer/receiver
HAROGIC SAE-90
Main features:
9 kHz~9.5 GHz real-time spectrum analyzer/receiver
Superheterodyne digital receiver architecture, 14segments pre-selected filter
9 kHz~9.5 GHz typical image suppression>90 dB, typical IF rejection>90 dB
100 MHz analysis bandwidth with adjustable sampling rate, 1.2 THz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 188 grams (core module), size 118 × 60 × 15 mm, power consumption 10-14 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from – 20 ℃/- 40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interfaceAvailable options
Code Name Option Explanation
01 Built-in OCXO reference clock (hardware) Providing a reference clock with better stability than the standard
configuration, with a temperature drift of<0.2 ppm, increasing the overall power consumption by 0.8 W 10 MUXIO IO extended board (accessory) Converting the MUXIO interface into multiple MMCX and board to wire connector to facilitate the connection of trigger input, output, and other signals 11 External GNSS (accessory) Standard GNSS module connected to MUXIO 12 External high precision GNSS (accessory) High precision GNSS module connected to MUXIO 13 External GNSS disciplined OCXO reference clock (accessory) Providing GNSS disciplined reference clock and 1PPS, increasing the overall power consumption by 1.1W 20 Extended temperature class (hardware) Extending the operating temperature to – 20~70 ℃ 21 Wide temperature class (hardware) Extending the operating temperature to – 40~70 ℃ DatasheetSKU: n/a -
Oscilloscope 4 channles
Rigol DS4014
100 MHz, 4 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields.SKU: 218
-
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
-
-
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshooting -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
compact real-time spectrum analyzer/receiver
HAROGIC SAE-90
Main features:
9 kHz~9.5 GHz real-time spectrum analyzer/receiver
Superheterodyne digital receiver architecture, 14segments pre-selected filter
9 kHz~9.5 GHz typical image suppression>90 dB, typical IF rejection>90 dB
100 MHz analysis bandwidth with adjustable sampling rate, 1.2 THz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 188 grams (core module), size 118 × 60 × 15 mm, power consumption 10-14 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from – 20 ℃/- 40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interfaceAvailable options
Code Name Option Explanation
01 Built-in OCXO reference clock (hardware) Providing a reference clock with better stability than the standard
configuration, with a temperature drift of<0.2 ppm, increasing the overall power consumption by 0.8 W 10 MUXIO IO extended board (accessory) Converting the MUXIO interface into multiple MMCX and board to wire connector to facilitate the connection of trigger input, output, and other signals 11 External GNSS (accessory) Standard GNSS module connected to MUXIO 12 External high precision GNSS (accessory) High precision GNSS module connected to MUXIO 13 External GNSS disciplined OCXO reference clock (accessory) Providing GNSS disciplined reference clock and 1PPS, increasing the overall power consumption by 1.1W 20 Extended temperature class (hardware) Extending the operating temperature to – 20~70 ℃ 21 Wide temperature class (hardware) Extending the operating temperature to – 40~70 ℃ Datasheet -
Oscilloscope 4 channles
Rigol DS4014
100 MHz, 4 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields.
-
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
-
-
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Digital Radiocommunication Tester
ROHDE & SCHWARZ CMD60
The Digital Radiocommunication Tester is an advanced top-class instrument for measurements on base stations (BTS) and BTS modules.
The LCD display with softkeys on both sides allows menu-guided convenient callup of test routines.
These testers combine compact size with high measurement accuracy and speed. They are suitable both for stationary and mobile use and feature great ease of operation and high reliability. Operation is extremely easy and requires no detailed GSM knowledge.
CMD allows measurements on transmitters and receivers of base stations without affecting telephone calls in progress.
The Rohde & Schwarz CMD60 addresses all aspects of test and measurement applications from production and service to development and quality assurance. It comes equipped with remote control via IEEE488/IEC625 bus + RS232, automated regression and stress testing of DUT, and automatic go/no go testing of fixed and portable part.Additional Features:
High production output at low investment for test equipment
The R&S® CMD60 can be remote controlled via IEC/IEEE-bus interface using SCPI-compatible commands.
Comprehensive test capabilities implemented in one single unit.
Comprehensive in-depth measurements based on ETSI Rec. CTR06
Automatic regression and stress tests
The tester supplies a great number of DECT-specific signals such as bit clock, TX/RX enable, to control the module under test
Comprehensive audio tests
Ergonomic user interface and relaxed manual operation due to a large bright LCD (requires noDECT-specific knowledge) strictly separated from the expert user interface for configuration
Integrated tools such as a scope display for power and FM demodulation versus time ease troubleshooting -
Audio Analyzer
AGILENT-Hp/Keysight U8903A
DC to 100kHz frequency range
Generator, analyzer, graph and sweep modes
High-quality signals and arbitrary waveforms
S-N ratio, SINAD, IMD, DFD, THD+N ratio, THD+N level, crosstalk and more
GPIB, LAN and USB interfacesWhether listening to mono, stereo or surround, the human ear knows what sounds good. Measuring how good, however, can be a challenge. The Keysight (Agilent/HP) U8903A audio analyzer helps you measure and quantify audio performance in applications such as wireless audio, analog components and ICs, and consumer audio.
Across the audio spectrum and beyond, this scalable, single-unit solution provides versatile measurement functions, diverse test signals and powerful analysis capabilities. Whatever your application, the U8903A can help you make an audible difference in device performance.
-
compact real-time spectrum analyzer/receiver
HAROGIC SAE-90
Main features:
9 kHz~9.5 GHz real-time spectrum analyzer/receiver
Superheterodyne digital receiver architecture, 14segments pre-selected filter
9 kHz~9.5 GHz typical image suppression>90 dB, typical IF rejection>90 dB
100 MHz analysis bandwidth with adjustable sampling rate, 1.2 THz/sec spectrum sweep speed
FPGA based digital signal processing
Weight 188 grams (core module), size 118 × 60 × 15 mm, power consumption 10-14 W
Highly compatible API interfaces and SAStudio4 GUI
Compatible with ARM and x86 processors, Linux and Windows operating systems
Operating temperatures range from – 20 ℃/- 40 ℃ to 70 ℃ (option)
USB 3.0/2.0 Type-C interfaceAvailable options
Code Name Option Explanation
01 Built-in OCXO reference clock (hardware) Providing a reference clock with better stability than the standard
configuration, with a temperature drift of<0.2 ppm, increasing the overall power consumption by 0.8 W 10 MUXIO IO extended board (accessory) Converting the MUXIO interface into multiple MMCX and board to wire connector to facilitate the connection of trigger input, output, and other signals 11 External GNSS (accessory) Standard GNSS module connected to MUXIO 12 External high precision GNSS (accessory) High precision GNSS module connected to MUXIO 13 External GNSS disciplined OCXO reference clock (accessory) Providing GNSS disciplined reference clock and 1PPS, increasing the overall power consumption by 1.1W 20 Extended temperature class (hardware) Extending the operating temperature to – 20~70 ℃ 21 Wide temperature class (hardware) Extending the operating temperature to – 40~70 ℃ Datasheet -
Oscilloscope 4 channles
Rigol DS4014
100 MHz, 4 ch, 4 GS/s
The DS4000 series digital oscilloscope is a versatile, high performance oscilloscope that incorporates many of today’s most advanced technologies and processes. Featuring bandwidths between 100MHz and 500MHz, sample rates up to 4GSa/s and up to 4 analog channels, the DS4000 is ideal for a wide variety of markets including communications, defense, aerospace, industrial electronics, R&D and educational fields.