ItalianoShop
Showing 421–450 of 1386 results
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHzSKU: 1204 -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
DatasheetSKU: 1168 -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
DatasheetSKU: 1166 -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputsSKU: 1160
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHz -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs
-
Waveguide Variable Attenuator
HP-Agilent/Keysight X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensitive to changes in temperature and humidity which can affect the resistive card of ordinary adjustable flap attenuators. The attenuation value is highly accurate and is stable from 0 to 50 dB. The instrument features large, easy-to-read dials, and can handle considerable microwave power. – Frequency range: 8.2 to 12.4 GHz. – Maximum SWR: 1.15. – Attenuation accuracy: ± 0.2% or 0.1 dB (whichever is greater). – Attenuation range: 0 to 50 dB. – Maximum power (CW): 10 Watts. – Waveguide designator: EIA WR-90 MIL-W-85/1-077. -Flange designator: UG-135/U MIL-F-3922/54C-008.
8.2 to 12.4 GHz -
Power Supply
HP-Agilent/Keysight 6654A
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 500W GPIB 665x series provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Keysight 540W, single output 6654A is a fast and flexible power supply or automated testing, and is designed to increase test throughput with fast up- and downprogramm.
Output Ratings
Output voltage: 0 to 80 V
Output current (40°C): 0 to 6 A
Maximum current (50°C/55°C): 8.1 A/7.7 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 8 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 500 µV
Peak-to-Peak: 5 mV
Current rms: 3 mA
Datasheet -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
Power Supply
HP-Agilent/Keysight 6625A
Keysight high performance DC power supplies offer spec and accuracy for test optimization. The precision multiple output, 25W – 50W GPIB 6625A, 6626A, 6628A, and 6629A provide fast, low-noise outputs- dual-range, precision low current measurement- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. * Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA. * Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA. * High range volts, amps 25W: 0 to 50 V, 0 to 500 mA. * High range volts, amps 50W: 0 to 50 V, 0 to 1 A or, 0 to 16 V, 0 to 2 A. * Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high). * Voltage 50W: 0.016% + 53 mV (low), 10 mV (high). * Current 25W: 0.04% + 15 µA (low), 100 µA (high). * Current 50W: 0.04% + 185 µA (low), 500 µA (high). * Voltage rms: 500 µV. * Peak-to-peak: 3 mV. * Current rms: 0.1 mA.
25W or 50W, 2 outputs