ItalianoShop
Showing 331–360 of 1386 results
-
-
-
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
€7,695.00€8,595.00View Product -
-
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIPSKU: n/a -
Power Sensor
AGILENT E9323A
AGILENT E9323A E-Series Power Sensor, 50 MHz to 6 GHz
The E9323A diode power sensor has a 5 MHz video bandwidth and is ideal for time-gated peak, average and peak-to-average ratio power measurements on W-CDMA wireless formats such as cdma2000.Key Features & Specifications:
– 5 MHz video bandwidth, ideal for W-CDMA and cdma2000 applications
– Fast measurement speed, up to 1000 corrected readings per second, via the GPIB
– Wide dynamic range
– Calibration factors, linearity, temperature and bandwidth correction stored in EEPROM
– Precision type-N connector as standard
– Operates with the EPM-P (E4416A/ 17A) series and P-Series (N1911A/ 12A) power meters
DatasheetSKU: n/a -
Senza categoria
M/A-COM MICROWAVE POWER DEVICES AMPLIFIER 2-400 MHZ 200 WATTS
AMPLIFICATORE M/A-COM MICROWAVE POWER DEVICES,INC. HAUPPAUGE, N.Y. 11788
M/A-COM MICROWAVE POWER DEVICES SOLID STATE AMPLIFIER 1040-22/6140 + EWAL 0230-22/6140 + FILTER SWITCHING UNIT FS0240-22/6140 + EWAL 3010-22/6140SKU: n/a -
Microwave
INTER-CONTINENTAL MICROWAVE TF-3001-E
The ICM Adjustable Test Fixture Mainframe Series TF-3000 provides a highly flexible test platform for microwave semiconductor measurements, such as S-parameters, noise figure, etc. Both RF-launches can be adjusted in y and z axis to accommodate DUTs with offsets and different substrate thickness'.
Full compatibility with all Midsections and Calibration Kits is maintained. The concept of having a mainframe with plug-in type midsections makes it a very adaptable and cost-effective solution. De-embedding can be done easily with available TRL or TOSL Calibration Standards.
Many different midsections are available for FET-chip measurements, Bipolar-Chip measurements, MMIC-Chip measurements, and Packaged transistors (low noise to power devices). Excellent RF characteristics and measurement repeatability are designed into the basic fixture. Replaceable Connector Transition Assemblies allow the use of APC-7, APC-3.5, SuperSMA, K and 2.4mm connectors to be used with the same mainframe (male and female interfaces available).SKU: n/a -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technologySKU: n/a€239.00 View Product -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
SKU: n/a -
Senza categoria
EWIG CR200 Crucible for the tinning and rewinding of copper wires
EWIG CR200 Crucible for the tinning and rewinding of copper wires
Compatible with lead-free alloys
Electronic regulation of power and temperature from 0 to 500 ° C
200W-230V ~ 2000 10 504
200W-230V ~ 2000 10 553SKU: n/a -
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgradesSKU: n/a -
RIGOL MSO7054
MSO7000/DS7000 series is a multifunctional and high-performance digital oscilloscope designed on the basis of the UltraVision II technology developed by RIGOL. Integrating 6 independent instruments into one, the MSO7000/DS7000 series is equipped with super high sample bandwidth ratio of 10 GSa/s, extremely high memory depth of up to 500 Mpts, clear 10.1″ display, excellent waveform capture rate of 600.000 wfms/s, and powerful data analysis functions.
Many of its specifications have reached the top level in the industry. With sound solutions for mainframes, optional & accessories, and application software, it has aroused great attention from customers in the areas such as industrial control, power supply, and automotive electronics.
In today's inegrated designfield, a highly integrated comprehensive digital oscilloscope has become a useful tool for design engineers. The MSO7000/DS7000 series digital oscilloscope launched by RIGOL this time integrates 6 independent instruments into 1, including one digital oscilloscope, one 16-channel logic analyzer, one arbitrary waveform generator, one digital voltmeter, one high-precision frequency counter and accumulator, and one protocol analyzer.
The MSO7000/DS7000 series offers you a flexible and economical solution to address your actual needs.
The Rigol DS7000-BND is a bundle package containing the following software options for DS7000 and MSO7000 oscilloscopes. Please note, the MSO7000-AWG is only usable on MSO models.DS7000-COMP – RS232/UART Protocol Trigger and Analysis
DS7000-EMBD – I2C and SPI Protocol Trigger and Analysis
DS7000-AUTO – CAN and LIN Protocol Trigger and Analysis
DS7000-FLEX – FlexRay Protocol Trigger and Analysis
DS7000-AUDIO – I2S Protocol Trigger and Analysis
DS7000-AERO – MIL-STD-1553 Protocol Trigger and Analysis
DS7000-PWR – Power Analysis Measurements
MSO7000-AWG – Dual Channel 25MHz Generator (MSO Only)SKU: n/a€5,690.00 View Product -
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements availableSKU: n/a€3,395.00€4,195.00View Product -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mASKU: n/a -
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– CaseSKU: n/a -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
SKU: n/a€7,695.00€8,595.00View Product -
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1299€1,143.00 View Product -
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1298€959.00 View Product -
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1297€607.00 View Product -
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
SKU: 1296€439.00 View Product -
Oscilloscope 2 channels
Rigol DS2102E
The Rigol DS2102E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2072A has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
SKU: 1295€579.00 View Product -
Oscilloscope 2 channels
Rigol DS2202E
The Rigol DS2202E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 200 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2202E has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
SKU: 1294€749.00 View Product -
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
SKU: 1293 -
Oscilloscope 2 channels
Tektronix TDS2002B
The TDS2002B is a digital storage oscilloscopes with 2 Channel, 60 MHz, 1 GSPS and 2.5 kpts. The TDS2000B Series digital storage oscilloscopes deliver an unbeatable combination of performance and ease-of-use at a price you can afford. The Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 11 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize and troubleshoot circuits.
SKU: 1291
-
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIP -
Power Sensor
AGILENT E9323A
AGILENT E9323A E-Series Power Sensor, 50 MHz to 6 GHz
The E9323A diode power sensor has a 5 MHz video bandwidth and is ideal for time-gated peak, average and peak-to-average ratio power measurements on W-CDMA wireless formats such as cdma2000.Key Features & Specifications:
– 5 MHz video bandwidth, ideal for W-CDMA and cdma2000 applications
– Fast measurement speed, up to 1000 corrected readings per second, via the GPIB
– Wide dynamic range
– Calibration factors, linearity, temperature and bandwidth correction stored in EEPROM
– Precision type-N connector as standard
– Operates with the EPM-P (E4416A/ 17A) series and P-Series (N1911A/ 12A) power meters
Datasheet -
Microwave
INTER-CONTINENTAL MICROWAVE TF-3001-E
The ICM Adjustable Test Fixture Mainframe Series TF-3000 provides a highly flexible test platform for microwave semiconductor measurements, such as S-parameters, noise figure, etc. Both RF-launches can be adjusted in y and z axis to accommodate DUTs with offsets and different substrate thickness'.
Full compatibility with all Midsections and Calibration Kits is maintained. The concept of having a mainframe with plug-in type midsections makes it a very adaptable and cost-effective solution. De-embedding can be done easily with available TRL or TOSL Calibration Standards.
Many different midsections are available for FET-chip measurements, Bipolar-Chip measurements, MMIC-Chip measurements, and Packaged transistors (low noise to power devices). Excellent RF characteristics and measurement repeatability are designed into the basic fixture. Replaceable Connector Transition Assemblies allow the use of APC-7, APC-3.5, SuperSMA, K and 2.4mm connectors to be used with the same mainframe (male and female interfaces available). -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technology -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– Case -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
-
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
-
Oscilloscope 2 channels
Rigol DS2102E
The Rigol DS2102E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2072A has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
-
Oscilloscope 2 channels
Rigol DS2202E
The Rigol DS2202E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 200 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2202E has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
-
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
-
Oscilloscope 2 channels
Tektronix TDS2002B
The TDS2002B is a digital storage oscilloscopes with 2 Channel, 60 MHz, 1 GSPS and 2.5 kpts. The TDS2000B Series digital storage oscilloscopes deliver an unbeatable combination of performance and ease-of-use at a price you can afford. The Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 11 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize and troubleshoot circuits.
-
Attenuator
HP 8494G Programmable Step Attenuator, DC to 4 GHz
The 8494G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 1 dB steps from 0 to 11 dB. Precision gold-plated leaf springs ensure long-life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
* Frequency range: dc to 4 GHz
* Insertion loss at 0 dB: 0.6 dB + 0.09 dB/GHz
* Maximum SWR: 1.5
* Repeatability life: 0.03 dB max 5 million cycles per section, typical
* 5 million cycles per section
* Maximum RF input power: 1 W (average), 100 W (peak)
* Connector type: choice of Type-N female, SMA female, APC-7
* Programming connector: 12-pin Viking, optional 14-pin DIP -
Power Sensor
AGILENT E9323A
AGILENT E9323A E-Series Power Sensor, 50 MHz to 6 GHz
The E9323A diode power sensor has a 5 MHz video bandwidth and is ideal for time-gated peak, average and peak-to-average ratio power measurements on W-CDMA wireless formats such as cdma2000.Key Features & Specifications:
– 5 MHz video bandwidth, ideal for W-CDMA and cdma2000 applications
– Fast measurement speed, up to 1000 corrected readings per second, via the GPIB
– Wide dynamic range
– Calibration factors, linearity, temperature and bandwidth correction stored in EEPROM
– Precision type-N connector as standard
– Operates with the EPM-P (E4416A/ 17A) series and P-Series (N1911A/ 12A) power meters
Datasheet -
Microwave
INTER-CONTINENTAL MICROWAVE TF-3001-E
The ICM Adjustable Test Fixture Mainframe Series TF-3000 provides a highly flexible test platform for microwave semiconductor measurements, such as S-parameters, noise figure, etc. Both RF-launches can be adjusted in y and z axis to accommodate DUTs with offsets and different substrate thickness'.
Full compatibility with all Midsections and Calibration Kits is maintained. The concept of having a mainframe with plug-in type midsections makes it a very adaptable and cost-effective solution. De-embedding can be done easily with available TRL or TOSL Calibration Standards.
Many different midsections are available for FET-chip measurements, Bipolar-Chip measurements, MMIC-Chip measurements, and Packaged transistors (low noise to power devices). Excellent RF characteristics and measurement repeatability are designed into the basic fixture. Replaceable Connector Transition Assemblies allow the use of APC-7, APC-3.5, SuperSMA, K and 2.4mm connectors to be used with the same mainframe (male and female interfaces available). -
Function/Arbitrary Waveform Generator
RIGOL DG811
The DG800 redefines the entry level waveform generator by bringing advanced capabilities like 16 bit high resolution, intuitive touch screen control, and a quiet fanless design to our most affordable line of generators. Add SiFi II point-to-point sampling technology and 2 MPts of standard arb memory and the DG800 Series delivers a powerful low cost generator for students and engineers alike.
High quality one channel function / arbitrary waveform generator with 10 MHz bandwidth, 125 MSa/s and 2 Mpts memory (up to 8Mpts as option).
• 16 Bit Resolution on All Models
• Intuitive Next Generation Touch Interface
• 10MHz to 100MHz Frequency Ranges
• Fanless Cooling for silent operation
• High Sample Rate and Long Memory
• Advanced Capabilities like Dual-Tone, Harmonics and Sequencing
• Complex Integrated Functions like PRBS Patterns and RS232 Generation
• Enhanced Waveform modes and Signal Fidelity with SiFi II technology€239.00 View Product -
Senza categoria
LUKEY 850D SMD REWORK STATION – HOT AIR SOLDERING STATION
Lukey 850D is a hot air single-channel soldering/desoldering station for working with SMD, QFP, PLCC, SOP, SOIC, CHIP, BGA components.
· Ultra-fast heating up to the required temperature.
· Temperature and blast control of the hot air station.
· Temperature control of the air stream by means of digital display and microprocessor system using “UP” and “DOWN” buttons with +/- 1C accuracy.
· Set automatic interrupting time at 30, 60 minutes and permanently (Sleep Timer) to prolong life time of the heating element.
· Station is completed with 4 exchangeable tips with different diameter to ensure universal application of the equipment.
· Heating element type: metallic incandescent wire
· Compressor type: diaphragm pump
· Airstream: 23 l/min (max)
· Operating surface resistivity on the
· Light and handy hot air station handle.
· Digital indication of real and fixed temperature
· Operating temperature range of hot air station: 100 – 420C “case”: up to 2Ohm
· ”Case” – to – operating surface potential difference: up to 2mV
· Galvanic isolation
· Made from anti-static materials.
· Hot air station power – 350W
· Automatic retroactive temperature control, holding up of constant temperature, irrespective of airspeed.
· Automatic cooling system. After soldering station is switched off, the hot air station is cold aired falling up less then 50C. This option prevents casual burns and prolongs the life time of the heating element.
· Supply voltage of the station: 220-240V AC
· Power consumption: 300W
· Heating element power consumption: 250W
· Compressor power consumption: 20W
-
Base Station
MOTOROLA MTR2000 – BASE STATION, REPEATER AND RECEIVER
Motorola’s MTR 2000 Station/Repeater/Receiver is a continuous-duty analog base/repeater station for use on both conventional and trunking systems in the VHF, UHF, and 800 and 900 MHz bands.
Onboard self-testing and a microprocessor-based design keeps system up-time at a maximum.Provides Unmatched Flexibility in a Compact Design:
Analog operation in conventional systems
Analog operation in SMARTNET or SmartZone trunking systems
Software based design allows for future system applications
75-20 Watt variable power models 8 Compact dimensions, 3 rack units (5.25˝ or 13.3 cm), utilize expensive site space efficiently
12.5 or 25 kHz programmable channel spacing (800 MHz)
12.5 kHz channel spacing (900 MHz)
Contributes to Maximizing System Up-Time:Microprocessor based design with integrated DSP capability
Continuous duty cycle operation
Self testing monitors station performance
Switching power supply functions over a wide range of voltages and frequencies
Shortens Installation and Maintenance Time:Programming and diagnostic testing performed through a personal computer
Standard EIA 19˝ rack mount configuration
Lightweight (40 lbs/19 kg)
Functionally separate modules: Field Replaceable Units (FRU)
Software based design simplifies upgrades -
€5,690.00 View Product
-
Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA3030
For all new order of RSA3000(-TG) versions (not valid for RSA3000E versions) we providing free of charge 25 MHz real time bandwidth
and 1 Hz RBW Option (RSA3000-B25 and RSA3000-BW1)
The Rigol RSA3000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration. Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading Realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
Rigol’s new RSA3000 series spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price.
The RSA3000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.
The Real-Time-Bandwidth of 10 MHz (35 MHz and 40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time. The new spectrum analyzer offers the ability to trigger and capture signals by 100% if longer than 7.45 µs in duration. The RSA3000 have RBW settable down to 10 Hz, a DANL (displayed average noise level) down to -161 dBm (typical) and a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode.
EMI filter and detector such as 9KHz, 120kHz and Quasi-Peak as example are standard. Extendibility: 40MHz Real-Time-Bandwidth, Pre-Amplifier, High Stability Clock, Advanced Measurement Kit, EMI Pre-compliance Test Software can be added optional.
RSA3000 SERIES
9 kHz to 3 or 4.5 GHz Frequency Range
10.1” Capacitive touchscreen display
Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
7 Real-Time visualization modes
100 % POI as low as 7. 45 µs
10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
1 ms full span sweep speed
EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
Tracking Generator and VSWR measurements available€3,395.00€4,195.00View Product -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Attenuator
FMI ROTARY ATTENUATOR 14110 + Qty 2 of 14094-NF10 + 14040 + 14270-20-04 + CASE
The Flann Mircrowave FMI 14110 is a rotary attenuator, with the following features and accessories:
– Frequency Range: 5.38 – 8.18 GHz.
– Attenuation Range: 0 – 60dB.– Qty. 2 of Flann Microwave 14094-NF10
– Flann Microwave 14040
– Flann Microwave 14270-20-04
– Case -
Spectrum Analyzer, Spectrum Analyzer - Analizzatore di Spettro
RIGOL RSA5065
For all new order of RSA5000(-TG) versions we providing free of charge 40 MHz real time bandwidth
and Pre-Amplifier Option (RSA5000-B40 and RSA5000-PA)
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference. Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems. The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events.
The Rigol RSA5000 series is a compact and light weight spectrum analyzer series with premium performance standard spectrum analysis capabilities combined with a Real-Time Spectrum Analyzer which makes it possible to never miss any signal that is longer than 7.45 µs in duration.
The Real-Time-Bandwidth of 25 MHz (40 MHz optional) and the Frequency-Mask-Trigger let you visualize, isolate and capture signals to analyze their behavior over amplitude, frequency and time.
These spectrum analyzers redefines the product category of general purpose spectrum analyzer by adding Real-Time spectrum trigger and analysis capabilities and sets a new level performance and price. The RSA5000 family features a 10.1” touchscreen display, compact design and easy-to-use interface and operations, making it ideal for benchtop or field apps in RF and wireless testing and production such as IoT, RFID, analog and digital modulated signals. Embedded-System-Designer can cross trigger and analyze bus signals like IC2, SPI with RF Signals.- 9 kHz to 3.2 or 6.5 GHz Frequency Range
- 10.1” Capacitive touchscreen display
- Displayed Average Noise Level as low as -165 dBm with opt. PreAmplifier
- Real-Time Analysis Bandwidth of 25 MHz standard (40 MHz option)
- Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
- 7 Real-Time visualization modes
- 100 % POI as low as 7. 45 µs
- 1 Hz Minimum Resolution Bandwidth (RBW)
- 1 ms full span sweep speed
- EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
- Tracking Generator and VSWR measurements available
€7,695.00€8,595.00View Product -
DC Electronic Load
Rigol DL3031A
The Rigol DL3031A is a cost-effective programmable DC electronic load for max. 150V, 60A, 350W with USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€1,143.00 View Product -
DC Electronic Load
Rigol DL3031
The Rigol DL3031 is a cost-effective programmable DC electronic load max. 150V, 60A, 350W. With USB Host, USB Device and RS232 interface. LAN is available as an option. with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€959.00 View Product -
DC Electronic Load
RIGOL DL3021A
The Rigol DL3021A is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device, LAN and RS232 interface, performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€607.00 View Product -
DC Electronic Load
Rigol DL3021
The Rigol DL3021 is a cost-effective programmable DC electronic load max. 150V, 40A, 200W. With USB Host, USB Device and RS232 interface. LAN is available as an option and performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes.
€439.00 View Product -
Oscilloscope 2 channels
Rigol DS2102E
The Rigol DS2102E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 100 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2072A has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
€579.00 View Product -
Oscilloscope 2 channels
Rigol DS2202E
The Rigol DS2202E is a very high quality two channel digital storage oscilloscope. It features a real-time sample rate of up to 1 GSa/s per channel and a bandwidth of 200 MHz.
The Rigol oscilloscopes are equipped with well designed and easy to use controls offering comprehensive ease-of-use functions for all measuring tasks. The menu navigation is intuitive and available in several languages.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS2202E has a refresh rate of up to 50.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course. The quality of the Rigol oscilloscopes is comparable to Agilent and Tektronix oscilloscopes.
The particularly large TFT color displays are very easy to read. Thanks to an intelligent system for displaying or masking information, the largest possible area is always available for displaying signals. The signal curves, the FFT display, and other functions can be shown simultaneously on the display.
€749.00 View Product -
Oscilloscope 4 channles
Rigol DS4024E
The Rigol DS4024E is a very high quality four channel digital storage oscilloscope. It offers a real-time sample rate of up to 2 GSa/s (per channel) and and a bandwidth of up to 200 MHz.
This high performance standard not only ensures capturing real-time instantaneous signals, but also observes details of repeated signals. The DS4012 has a refresh rate of up to 110.000 wfms/s, enabling users to capture instantaneous signals, as well as abnormal signals more quickly. It also helps to enhance the waveform capturing ability and to expedite a circuit debug course.
Other advantages: 9″ color LCD, bright and vivid waveform display; versatile trigger modes: i.e. slope, alternative, rise&fall edge, enables users to stabilize the signal more easily. In economic context, the DS4012 clearly has the highest performance standard and the largest number of functions, making it a top of the range oscilloscope.
Attention: All DS/MSO4000 are equipped with a new fan which is much more quiet than before!
-
Oscilloscope 2 channels
Tektronix TDS2002B
The TDS2002B is a digital storage oscilloscopes with 2 Channel, 60 MHz, 1 GSPS and 2.5 kpts. The TDS2000B Series digital storage oscilloscopes deliver an unbeatable combination of performance and ease-of-use at a price you can afford. The Series oscilloscopes provide accurate real-time acquisition up to their full bandwidth, the same record length at all time base settings, advanced triggers to isolate signals of interest, and 11 standard automatic measurements on all models. Their Fast Fourier Transform (FFT) and waveform add, subtract, and multiply math functions allow you to analyze, characterize and troubleshoot circuits.