Tektronix 2465B

The 2465 Family oscilloscopes set new norms in measurement precision. With 1% horizontal system accuracy and 2% vertical deflection accuracy, they give you greater measurement confidence than ever before. On-screen vertical and horizontal cursors deliver immediate and
accurate results of voltage, time, frequency, ratio, and phase measurements.

Readouts permit easy setup and interpretation of waveform displays. The horizontal time base always remains calibrated with three significant digits and a decimal point, even if variable settings are used.

Cursors increase accuracy and operator productivity. With them, measurements can be made quickly, with almost no chance of interpretation errors and no CRT linearity error. The front panel controlled Channel 1 – Channel 2 delay-matching adjustment compensates probe and vertical-channel delay differences.

The 2465B Oscilloscope is a four-channel oscilloscope with a bandwidth of 400MHz, sensitivity of 2 mV at 400MHz, and risetime on all channels of 0.875 ns.
These oscilloscopes can trigger on any one of the four channel. New auto-level circuitry gives you convenient hands-off triggering, even with changing trigger-signal amplitudes. With the position-independent triggering, trigger level remains constant whenever you reposition the display. And the trigger-level readout enables you to preset the amplitude for predictable triggering on both logic thresholds and transient event.
Single-sequence triggering can capture a single event or multiple events by displaying a single sweep of each trace on the CRY. At the ends of the sequence, scale factors and other readout data are briefly displayed and graticule illumination flashes on momentarily, allowing waveform photography.

Four channels produce clear and complete views to simplify complex measurements. With the B sweep you can display any portion of the A sweep, including the A-sweep trigger event. Sweep-delay range is adjustable down to zero delay. This combination allows easy timing measurements
to be made on highly asymmetric or jittering waveforms. It provides accurate delayed and Δtime measurements–from the first pulse on the trace– and allows the operator to examine the A-trigger event in detail.

Input impedance is selectable between 1MΩ and 50Ω on Channels 1 and 2, eliminating the need for external 50Ω terminators. Overload protection is also ensured. If excessive signal is applied while 50Ω coupling is selected, coupling automatically switches to 1MΩ coupling to prevent possible damage.
These oscilloscope also has a sweep speed of 500 ps/Div, and Volts and Time cursors with on-screen readout. The 2465B has an Input that is switchable between 1 Mohm and 50 ohm, on-board capture allowing you to digitize, store and recall waveforms or analyze them on your PC. The 2465B also has a 20 ps Time Interval Resolution. Other features of the 2465B include Auto Setup, Set-Up Sequencing and Cursor After Delay.