ItalianoPower Supply
Showing 1–30 of 93 results
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kgSKU: n/a -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mASKU: n/a -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mASKU: 1102 -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
DatascheetSKU: 739€647.00 View Product -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
DatasheetSKU: 1166 -
Power Supply
AGILENT-Hp/Keysight 6645A
Questa serie di alimentatori CC regolati lineari da 200 W è progettata per massimizzare la produttività dei DUT attraverso il processo di test di produzione con tempi di programmazione rapidi su e giù.
I preziosi insiemi possono essere distrutti da un guasto minore di un componente che può consentire un flusso di tensione o corrente che fluisce verso il DUT. Le funzioni di protezione rapida, tra cui il piede di porco rapido, la protezione crossover in modalità e la possibilità di collegare i circuiti di protezione di più alimentatori possono aumentare il rendimento di produzione.
La programmazione dell'uscita CC e delle funzioni di protezione può essere effettuata dal pannello frontale o utilizzando i comandi SCPI standard del settore, tramite GPIB. Utilizzando il collegamento seriale, è possibile collegare fino a 16 alimentatori tramite un indirizzo GPIB. L'integrazione del sistema di test può essere ulteriormente semplificata utilizzando i driver VXIplug & play. La tensione e la corrente di uscita possono anche essere controllate con segnali analogici. Ciò è utile per alcuni tipi di ambienti rumorosi e anche per reazioni immediate ai cambiamenti di processo.Tensione flottante CC: i terminali di uscita possono essere fatti galleggiare fino a ± 240 V CC dalla terra del telaio.
Telerilevamento: è possibile far cadere fino a metà della tensione di uscita nominale in ciascun cavo di carico. La caduta del carico comporta la sottrazione della tensione disponibile per il carico.
Tempo di elaborazione del comando: il tempo medio necessario affinché la tensione di uscita inizi a cambiare in seguito alla ricezione di dati digitali è di 20 ms per gli alimentatori collegati direttamente al GPIB.
Tempo di risposta della programmazione dell'uscita: il tempo di salita e discesa (10/90% e 90/10%) della tensione di uscita è inferiore a 15 ms. La variazione della tensione di uscita si assesta entro 1 LSB (0,025% x tensione nominale) del valore finale in meno di 60 ms.
Programmazione verso il basso: un programmatore attivo verso il basso affonda circa il 20% della corrente di uscita nominale.Valori nominali di uscita
Tensione di uscita: da 0 a 120 V.
Corrente di uscita (40 ° C): da 0 a 1,5 A
Corrente massima (50 ° C / 55 ° C): 1,4 A / 1,3 APrecisione di programmazione a 25 ° C ± 5 ° C
Tensione 0,06% + 51 mV
Corrente 0,15% + 1,7 mARipple & Noise (20 Hz – 20 MHz)
Voltaggio rms: 700 µV
Tensione picco-picco: 7 mV
Corrente efficace: 1 mA
Scheda TecnicaSKU: n/a -
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
DatasheetSKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. DatasheetSKU: n/a -
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
DatasheetSKU: 895 -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
SKU: n/a -
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
SKU: n/a -
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L)SKU: n/a€120.00 View Product -
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
DatasheetSKU: n/a -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
DatasheetSKU: 319€450.00 View Product
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
Power Supply
AGILENT-Hp/Keysight 6645A
Questa serie di alimentatori CC regolati lineari da 200 W è progettata per massimizzare la produttività dei DUT attraverso il processo di test di produzione con tempi di programmazione rapidi su e giù.
I preziosi insiemi possono essere distrutti da un guasto minore di un componente che può consentire un flusso di tensione o corrente che fluisce verso il DUT. Le funzioni di protezione rapida, tra cui il piede di porco rapido, la protezione crossover in modalità e la possibilità di collegare i circuiti di protezione di più alimentatori possono aumentare il rendimento di produzione.
La programmazione dell'uscita CC e delle funzioni di protezione può essere effettuata dal pannello frontale o utilizzando i comandi SCPI standard del settore, tramite GPIB. Utilizzando il collegamento seriale, è possibile collegare fino a 16 alimentatori tramite un indirizzo GPIB. L'integrazione del sistema di test può essere ulteriormente semplificata utilizzando i driver VXIplug & play. La tensione e la corrente di uscita possono anche essere controllate con segnali analogici. Ciò è utile per alcuni tipi di ambienti rumorosi e anche per reazioni immediate ai cambiamenti di processo.Tensione flottante CC: i terminali di uscita possono essere fatti galleggiare fino a ± 240 V CC dalla terra del telaio.
Telerilevamento: è possibile far cadere fino a metà della tensione di uscita nominale in ciascun cavo di carico. La caduta del carico comporta la sottrazione della tensione disponibile per il carico.
Tempo di elaborazione del comando: il tempo medio necessario affinché la tensione di uscita inizi a cambiare in seguito alla ricezione di dati digitali è di 20 ms per gli alimentatori collegati direttamente al GPIB.
Tempo di risposta della programmazione dell'uscita: il tempo di salita e discesa (10/90% e 90/10%) della tensione di uscita è inferiore a 15 ms. La variazione della tensione di uscita si assesta entro 1 LSB (0,025% x tensione nominale) del valore finale in meno di 60 ms.
Programmazione verso il basso: un programmatore attivo verso il basso affonda circa il 20% della corrente di uscita nominale.Valori nominali di uscita
Tensione di uscita: da 0 a 120 V.
Corrente di uscita (40 ° C): da 0 a 1,5 A
Corrente massima (50 ° C / 55 ° C): 1,4 A / 1,3 APrecisione di programmazione a 25 ° C ± 5 ° C
Tensione 0,06% + 51 mV
Corrente 0,15% + 1,7 mARipple & Noise (20 Hz – 20 MHz)
Voltaggio rms: 700 µV
Tensione picco-picco: 7 mV
Corrente efficace: 1 mA
Scheda Tecnica -
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
-
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L) -
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
Datasheet -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet
-
Power Supply
METAF MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply
The MCP M10-QR305 2x30V/5A 5V/1A DC Linear Adjustable Power Supply is a equipment with high stability, high reliability, low noise, its output voltage or current can be continuously adjusted, and its constant voltage and current can auto-conversion. This low cost and universal power supply can be used in many different areas, from test of R&D equipment to test of production lines.
Features:
– Output off function
– Triple independent DC outputs. Two adjustable and one fixed output
– Independent, series and parallel variety output
– Constant voltage and constant current
– Low ripple and noise
– Four LED displays with 3 digits, selectable for two sets output voltage and current display simultaneously
– 16 hours continuous output with full load
– Auto tracking outputIndependent output:
CH1: 0-30V/0-05A
CH2: 0-30V/0-05A
CH3: 5V/1ASerial output:
CH1+CH2: 0-60V/0-5AParallel output:
CH1+CH2: 0-30V/0-10ASpecification:
Line Regulation: CV 1X10^-4+3mV CC 2X10^-3+3mA CH3 5mV
Load Regulation: CV 1X10^-4+4mV CC 2X10^-3+3mA CH3 15mV
Ripple & Noise: CV 1mVrms CC 3mA rms CH3 2mV
Display Accuracy: ±(0.5%Rdg+2digits)
Input Voltage: 110~127VAC±10%, 220~240VAC±10%
Dimensions (L x W x D): 250x135x460mm
Weight: 8,2 kg -
Power Supply
HP E3616A 60W Power Supply, 35V, 1.7A
Keysight basic DC power supplies offer essential features for a tight budget.
The single output, 30-60 W, E3610A-E3617A provide small, compact size for bench use; low-noise and excellent regulation; and dual-range outputs (E3610A/11A/12A).
The Keysight 60W, single output E3616A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
> Range 1: 0 to 35 V, 0 to 1.7 A
> Range 2: NA
> Power (max): 60 WRipple & Noise from 20 Hz to 20 MHz
> Voltage rms: 200 µV
> Peak-to-Peak: 1 mVLoad & Line Regulation
> 0.01% + 2 mVMeter Resolution
> Voltage: 10 mV (0-20 V), 100 mV (>20 V)
> Current: 1 mA -
Power Supply
HP-Agilent/Keysight E3620A
50W Dual Output Power Supply, Two 25V, 1A
Keysight basic DC power supplies offer essential features for a tight budget.
The multiple output, 35-50 W, E3620A and E3630A provide dual and triple outputs; small, compact size for bench use; low-noise and excellent regulation; and overload indicator to monitor output.
The Keysight 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.Output ratings (Maximum current is derated 3.3% per °C from 40°C to 55°C)
> Output 1: 0 to 25 V, 0 to 1 A
> Output 2: 0 to 25 V, 0 to 1 A
> Power (max): 50 WRipple & noise from 20 Hz to 20 MHz
> Normal Mode Voltage rms: 350 µV
> Peak-to-Peak: 1.5 mVLoad & line regulation
> 0.01% + 2mVMeter resolution
> Voltage: 10 mV (0-20 V), 100 mV, (>20 V)
> Current: 1 mA -
Power Supply
Rigol DP821A
The Rigol DP821A is a very high quality programmable laboratory power supply with two switchable outputs (60 V/1 A and 8 V/10 A) and a maximum power output of 140 W.
Like all Rigol devices, the power supply features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure.
The Rigol DP821A features a relative large (8.9 cm / 3.5″) and easy to read TFT color display. In addition to the normal digital displays for voltage, current, and power, these values can also be displayed as signal curves. A timer control can be used to set the output signal to different values in up to 2048 steps.
Datascheet€647.00 View Product -
Power Supply
AGILENT-Hp/Keysight 6644A
Output Ratings
Output voltage: 0 to 60 V
Output current (40° C): 0 to 3.5 A
Maximum current (50° C/55° C): 3.2 A/3 AProgramming Accuracy at 25°C ±5°C
Voltage 0.06% + 26 mV
Current 0.15% + 4.1 mARipple & Noise (20 Hz – 20 MHz)
Voltage rms: 500 µV
Voltage peak-to-peak: 5 mV
Current rms: 1.5 mAKeysight high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641A-6645A provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units.
The Keysight 210W, GPIB, single output 6644A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.
Datasheet -
Power Supply
AGILENT-Hp/Keysight 6645A
Questa serie di alimentatori CC regolati lineari da 200 W è progettata per massimizzare la produttività dei DUT attraverso il processo di test di produzione con tempi di programmazione rapidi su e giù.
I preziosi insiemi possono essere distrutti da un guasto minore di un componente che può consentire un flusso di tensione o corrente che fluisce verso il DUT. Le funzioni di protezione rapida, tra cui il piede di porco rapido, la protezione crossover in modalità e la possibilità di collegare i circuiti di protezione di più alimentatori possono aumentare il rendimento di produzione.
La programmazione dell'uscita CC e delle funzioni di protezione può essere effettuata dal pannello frontale o utilizzando i comandi SCPI standard del settore, tramite GPIB. Utilizzando il collegamento seriale, è possibile collegare fino a 16 alimentatori tramite un indirizzo GPIB. L'integrazione del sistema di test può essere ulteriormente semplificata utilizzando i driver VXIplug & play. La tensione e la corrente di uscita possono anche essere controllate con segnali analogici. Ciò è utile per alcuni tipi di ambienti rumorosi e anche per reazioni immediate ai cambiamenti di processo.Tensione flottante CC: i terminali di uscita possono essere fatti galleggiare fino a ± 240 V CC dalla terra del telaio.
Telerilevamento: è possibile far cadere fino a metà della tensione di uscita nominale in ciascun cavo di carico. La caduta del carico comporta la sottrazione della tensione disponibile per il carico.
Tempo di elaborazione del comando: il tempo medio necessario affinché la tensione di uscita inizi a cambiare in seguito alla ricezione di dati digitali è di 20 ms per gli alimentatori collegati direttamente al GPIB.
Tempo di risposta della programmazione dell'uscita: il tempo di salita e discesa (10/90% e 90/10%) della tensione di uscita è inferiore a 15 ms. La variazione della tensione di uscita si assesta entro 1 LSB (0,025% x tensione nominale) del valore finale in meno di 60 ms.
Programmazione verso il basso: un programmatore attivo verso il basso affonda circa il 20% della corrente di uscita nominale.Valori nominali di uscita
Tensione di uscita: da 0 a 120 V.
Corrente di uscita (40 ° C): da 0 a 1,5 A
Corrente massima (50 ° C / 55 ° C): 1,4 A / 1,3 APrecisione di programmazione a 25 ° C ± 5 ° C
Tensione 0,06% + 51 mV
Corrente 0,15% + 1,7 mARipple & Noise (20 Hz – 20 MHz)
Voltaggio rms: 700 µV
Tensione picco-picco: 7 mV
Corrente efficace: 1 mA
Scheda Tecnica -
Power Supply
AGILENT-Hp/Keysight 6675A
Output Ratings
Output voltage: 0 to 120 V
Output current (40°C): 0 to 18 AProgramming Accuracy at 25°C ±5°C
Voltage 0.04% + 120 mV
Current 0.1% + 12 mARipple & Noise from 20 Hz to 20 MHz
Voltage rms: 1.9 mV
Peak-to-Peak: 16 mV
Current rms: 12 mAHp high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.
The Hp 2160W, GPIB, single output 6675A is a highly efficient low-noise supply that maximize test throughput and is designed to offer excellent reliability, low ripple and noise, and extremely accurate built-in measurements of voltage and current.
Datasheet -
Power Supply
AGILENT-Hp/Keysight E3631A
The triple output, 80 W, GPIB, E3631A provides small, compact size for bench use; low output ripple and noise; built-in measurements and basic programmable features with GPIB and RS232 interface. This clean and reliable supply is designed for general purpose applications; and combines convenient benchtop capabilities with flexible system features in a compact, multi-output package.
Output 1: 0 to 6 V, 0 to 5 A
Output 2: 0 to +25 V, 0 to 1 A
Output 3: 0 to -25 V, 0 to 1 A
Programming Accuracy at 25°C ±5°C
Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
+ Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA
Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms Readback Accuracy at 25°C ±5° 1200W, DC System Power Supplies,60V - 50A. Datasheet -
Power Supply
AGILENT-Hp/Keysight E3646A
The Agilent E3646A 60-watt dual-output programmable power supply features built-in GPIB and RS-232 connectivity and SCPI language compatibility making it easy to create flexible power programs. For general-purpose use, this programmable power supply offers the performance of a system power supply at a surprisingly affordable price.
E364X: Basic System Power
The Agilent E3640A – E3649A power supplies fill the gap between manual bench power supplies and high performance system supplies, offering unmatched performance and functionality at a great price. They’re designed for moderate-speed test where automation is important and throughput is not critical. These single- and dual-output, dual range power supplies are ideal for contract manufacturers and OEMs who need to perform basic electronic functional tests on a variety of products quickly and economically.All models support GPIB and RS-232 for quick connectivity. SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. Less than 90 ms output settling time keeps throughput high without the need for a down programmer. Up to five store/recall states help minimize programming time while accelerating test. Remote sensing capability ensures output stability with longer leads.
Great Performance, Outstanding Price
With 30 to 100W of output power, the Agilent E364xA-series of programmable dc power supplies provides great performance at a great price. All ten models deliver clean power, dependable regulation, fast transient response and built-in GPIB and RS-232 interfaces. They’re designed to meet the needs of R&D design verification, production testing, QA verifications and other demanding applications with Agilent Technologies’ quality and reliability.Steady Output
With 0.01 percent load and line regulation, Agilent E364xA power supplies keep output steady when power line and load changes occur. They also specify low normal mode voltage noise and low common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection. Agilent E364xA power supplies specify less than 90 msec of voltage settling time at any output load condition.Remote Interface
Agilent E364xA power supplies support any PC with a GPIB (IEEE-488) card or RS-232 interface. Every model ships standard with both GPIB and RS-232. Easy-to-use SCPI (Standard Commands for Programmable Instruments) keeps programming fast and simple. The user manual provides information for beginning programmers, yet includes enough detail to help veteran programmers as well.Broad Support
VXIplug&play software drivers are available for Agilent VEE and National Instruments LabView™ and LabWindows™, simplifying integration of the E364xA into your test system. The drivers are supported under Microsoft® Windows 98 ® and NT. ®Front Panel Operation
An easy-to-use rotary knob and self-guiding keypads allow you to quickly and easily set output at the resolution you need. Voltage and current levels can be set to a maximum resolution of 10 mV/1 mA from the front panel. Up to five complete powers supply setups can be stored and recalled from the internal non-volatile memory. The output on/off button sets the output to zero. Dual output models allow two voltages or currents to be displayed simultaneously.
Datasheet -
Power Supply
AGILENT-Hp/Keysight N5748A
Output Ratings
Voltage: 80 V
Current: 9.5 A
Power: 760 WThe single output, 760W N5748A, provides universal AC input, GPIB, LAN, USB, LXI compliance, and analog/resistance control of output voltage and current. It delivers reliable performance and enhanced capabilities in a compact 1U package.
-
Power Supply
ELIND 3232
Electronic linear laboratory bench power supply model ELIND 328. Suitable for professional use. Adjustable in voltage and current: 0-32V and 0-3.2A continuous (DC). Outputs isolated from the ground (can therefore also be used with the positive to ground). Multiturn knob for fine tension adjustment. Tool to monitor voltage or current. Excellent condition. Used very little. Dimensions: 14.5×9.5x25cm. Weight 2Kg. 220V AC cable power supply
-
Power Supply
H10S CLT-100
Exclusive power supply is required for DC screwdrivers.
● Exclusive power supply converts the electric current from AC outlet (on the primary side) to low-voltage output (HI: DC30V) or (LOW: about DC20V) to supply it to the screwdriver.
● Safe and quiet rotation.
● Please always use HIOS screwdriver in combination with HIOS power supply for safe screw tightening.
● Stable power supply with multiple inputs (AC100V to 240V).
(Not applicable to CLT-100 and MC-70L)€120.00 View Product -
Power Supply
HP-Agilent/Keysight 6012B
These single-output supplies can replace multiple units, saving rack space and reducing system cost and complexity.
Autoranging outputs provide maximum power at a variety of operating points
Overvoltage features protect DUTs quickly and automatically
Auto-parallel or auto-series connections enable greater output flexibility
Ten-turn pots for precise local control1200W, DC System Power Supplies,60V – 50A.
Datasheet -
Power Supply
HP-Agilent/Keysight 6623A
Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W – 10 W GPIB 6621A – 6624A and 6627A provide dual-range outputs- fast, low-noise outputs- built-in measurements and advanced programmable features- and protection features to ensure DUT safety. The Agilent 80W, triple-output 6623A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package. Output Ratings – Low-range volts, amps: 0 to 7 V, 0 to 5 A- 0 to 20 V, 0 to 2 A- 0 to 7 V, 0 to 10 A – High range volts, amps: 0 to 20 V, 0 to 2 A- 0 to 50 V, 0 to 0.8 A- 0 to 20 V, 0 to 4 A Programming Accuracy at 25°C ±5°C – Voltage: 0.06% + 19 mV, 50 mV, 19 mV – Current: 0.16% + 50 mA, 20 mA, 100mA Ripple & Noise (20 Hz to 20 MHz) – Voltage rms: 500 µV – Peak-to-peak: 3 mV – Current rms: 1 mA
Datasheet€450.00 View Product