ItalianoCurrent Probe Amplifiter
Showing all 4 results
-
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
DatasheetSKU: n/a -
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
DatasheetSKU: n/a -
Current Probe Amplifiter
TEKTRONIX AM503
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303 Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303 Weight: 4 lb; Size: single width module DatasheetSKU: 429 -
Current Probe Amplifiter, Mainframe
TEKTRONIX TM502A+AM503+A6303
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303
Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303
Weight: 4 lb; Size: single width moduleSKU: n/a
-
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
Datasheet -
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Current Probe Amplifiter
TEKTRONIX AM503
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303 Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303 Weight: 4 lb; Size: single width module Datasheet -
Current Probe Amplifiter, Mainframe
TEKTRONIX TM502A+AM503+A6303
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303
Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303
Weight: 4 lb; Size: single width module
-
Current Probe Amplifiter
TEKTRONIX TCPA300
Current Probe Amplifier.
The TCPA300 from Tektronix is a current probe amplifier. This amplifier when used with TCP312A, TCP305A and TCP303 probes, provides a wide range of current measurement capability and spans the gap between low level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30A, 50A and 150A DC continuous and for even higher current levels. Higher frequency performance is available with TCP312A providing greater than or equal to 100MHz bandwidth and maximum current of 30A DC. The TCPA300 is approved by UL3111-1 first edition, CAN/CSA C22.2 number 1010.1-92, EN61010-1:2001, EC Council Directive 89/336/EEC, FCC Part 15, Subpart B class A and AS/NZS 2064.1/2 standards.DC to 100MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions
Low DC drift and noise allows improved low level current measurements
Datasheet -
Current Probe Amplifiter
TEKTRONIX A6303
The Tektronix A6303 aka P6303 is a 15 MHz, 100 A current probe.
It requires an AM503, AM5030 or 11A16 amplifier for operation. The Tektronix 067-0865-00 is a calibration fixture for the P6303.
Specifications
Bandwidth DC − 15 MHz
Rise time ≤23 ns
Input range 100 A continuous, 500 A peak, ≤10 kA · μs (with 11A16: 52.5 A continuous)Derating: 200 Ap-p up to 20 kHz, down to 20 Ap-p at 20 MHz (see curve)
Sensitivity 10 mA/Div to 50 A/Div, 1−2−5 (with AM503)
Noise ≤3 mA (@ 100 MHz amplifier BW, 10 mA range, DC)
Datasheet -
Current Probe Amplifiter
TEKTRONIX AM503
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303 Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303 Weight: 4 lb; Size: single width module Datasheet -
Current Probe Amplifiter, Mainframe
TEKTRONIX TM502A+AM503+A6303
Tektronix AM503 Current Probe Amplifier
The AM503 Current Probe Amplifier allows display of current on any oscilloscope having 10 mV/div sensitivity, 50 ohm or 1 megohm input, and at least 100 MHz bandwidth. It is compatible with A6302, A6303, P6302, P6303 current probes. It requires a TM500 or TM5000 series mainframe for operation.
Features:Allows for current display on any oscilloscope
Maximum input current: 20A for 6302; 100A for 6303
Bandwidth: >50 MHz 6302; >15 MHz 6303
Rise time: <7 ns 6302; <23 ns 6303
Deflection factor: 1 mA/div to 5 A/div for 6302; 20 mA/div to 50 A/div for 6303
Weight: 4 lb; Size: single width module